9.3x62 and 325gr Oryx Load?

[farmer23]

I recently purchased a Zastava 9.3x62 and some reloading components from Trade-Ex. I bought some 325gr Norma Oryx bullets but I am having a hard time finding any reloading info for this bullet weight. Does anyone have any experience with this combination? Any help would be greatly appreciated. Thanks in advance!

 

[burnt_servo]

I don't know if a guy can get easily get his hands on norma powder , but here is a link to norma's reloading info ;

http://www.norma.cc/en/Ammunition-Academy/Loading-Data/93x62/

 

[Kevan]

Google realguns.com as they have some good load info for the 9.3 with the bullet you have.
According to their info some pretty good groups were obtained.

 

[antiqueguy]

I don't know if a guy can get easily get his hands on norma powder , but here is a link to norma's reloading info ;

http://www.norma.cc/en/Ammunition-Academy/Loading-Data/93x62/

there is powders that can be used in place of Norma powders like reloader 15 in place of n203 id back off a few grains even on the starting load though. reloader 15 is what im using in my 9.3x57 http://www.adi-powders.com.au/handloaders-guide/equivalents.asp

 

[Linus]

Using PRVI brass and CCI 200 primers, I load 63.0 grains of H4350 under the Norma 325 Oryx with a COAL of 3.395". This is a maximum load in my CZ550 in this caliber. I would reduce the load by 10% for starters and, as always, work up carefully. Hope this helps.

 

[farmer23]

Thanks for the info guys! I was able to find the load data using Norma powder but I don't think anyone carries that powder in Canada. I couldn't find any anyways.

 

[antiqueguy]

Thanks for the info guys! I was able to find the load data using Norma powder but I don't think anyone carries that powder in Canada. I couldn't find any anyways.

the link I posted above

 

[MetricMan]

Correct me if I'm wrong, but I beleive that N203-B is RE-15, as in it's the same powder with different packaging.