Soviet combo deal with a free ak-74

johnone said:
We will have 7.62x25 here early in the new year.... we bought several million rds way back, awaiting the export docs
Marstar
Click to expand...

several million?
jaw_dropping_butch.jpg
 
Anyone trying to sell their wall hanger AK pm me pls. It'd look nice above the fireplace. I'll even pay to have it shipped from Marstar if u want to make things easier and pay up front so you have to come up with less to begin with.
 
i was told bolt was 45% cut and barrel welded .. when i asked when i purchased over phone . are my expectations of a ar-74 rifle that cycles and goes click wrong? what parts are destroyed on the ak?
 
If I was into the fake AK, I'd go for it. All I ever read about is people with fake Airsofts and replicas getting smoked by the police, so I think I'll pass. I do need some more 7.62, however. Might do the SKS combo deal instead - buy a ton of ammo, and get a cheap SKS for peanuts. I can always use another non-restrict that eats surplus ammo for the zombie apocalypse.

I'm on the fence for the Norc AR-15 & 1911 deal. I need neither, but I was looking to pick up a cheap AR to play with. Hard to decide. Then I need to buy .223 & .45. Don't really need the .45, either. I got a 9, .357 & a .50AE. Geez. What to do, what to do.

As an aside, I give shouts to Marstar for the emails I got with regards to an order I received Friday. I got emails saying my order was received, processed, sent to shipping, shipped, en route, notification dropped off, and order picked up.

Cannon
 
airtruck63chev said:
i was told bolt was 45% cut and barrel welded .. when i asked when i purchased over phone . are my expectations of a ar-74 rifle that cycles and goes click wrong? what parts are destroyed on the ak?
Click to expand...

First its exactly what they told me.... But after verification..... Bolt and trigger welded!!

I placed my order ! Just few left THEY told me....

Dont snooze guys.... You will loose!
 
Duff350 said:
First its exactly what they told me.... But after verification..... Bolt and trigger welded!!

I place my order ! Just few left THEY told me....

Dont snooze guys.... You will loose!
Click to expand...

trigger and bolt welded? cry

there goes having any fun with it.
 
found this online... dont think its going to cycle.. that ok still cool.

1. DEACTIVATION OF SMALL ARMS OF CALIBRE 20MM OR LESS
a. Semi-automatic, Full Automatic, Selective Fire, and Converted Firearms
1. A hardened steel blind pin of bore diameter or larger must be force fit through the
barrel at the chamber, and where practical, simultaneously through the frame or
receiver, to prevent chambering of ammunition. Furthermore, the blind pin must be
welded in place so that the exposed end of the pin is completely covered by weld. This
strength and hardness of the weld must be similar to that of the metal used in the
construction of the firearm. In the case of firearms having calibres greater than
12.7mm (.5 inch), the pin need not be larger in diameter than 12.7mm. In the case of
multi-barreled firearms, all barrels must be pinned, using as many pins as necessary to
block all chambers.
2. The barrel must be welded to the frame or receiver to prevent replacement.
3. The breech face or portion of the breach bolt which supports the cartridge must be
removed or drilled out to a diameter at least as large as the base of the cartridge so that
the bolt can no longer support the cartridge.
4. The receiver must be welded closed to prevent replacement of the breech bolt.
5. In the case of firearms designed to support full-automatic fire, the trigger mechanism
must be rendered unusable. Any trigger mechanism part or component which is
necessary for full-automatic fire must be destroyed by cutting or grinding and welded
in place to prevent replacement.
 
Ya... They told me that they drill some holes.... Weld the bolt and the trigger.....And from exterior its impossible to see its desactivated.....(like if your ak is on a wall.... That style look like a real non desactivated one)
 
The AK is cool...but its a very $$$ paper weight...

I'd rather a nerf gun, they at least fire something.
 
johnone said:
Then why don't you import them ??
Marstar
Click to expand...

Different countries have different deactivation standards. Even if an imported firearm has been deactivated, it will be treated as an active firearm until it is in Canada and the deactivation can be confirmed by a licensed gunsmith. To import such a firearm, you need a valid licence allowing you to import that class of firearm and you need to register the firearm. Once a licensed gunsmith in Canada has confirmed that the firearm modifications meet Canadian deactivation standards, the firearm may be deregistered.

I do not have s.12(2) on my licence that is why I can't import. You on the other side...
 
kozack said:
Different countries have different deactivation standards. Even if an imported firearm has been deactivated, it will be treated as an active firearm until it is in Canada and the deactivation can be confirmed by a licensed gunsmith. To import such a firearm, you need a valid licence allowing you to import that class of firearm and you need to register the firearm. Once a licensed gunsmith in Canada has confirmed that the firearm modifications meet Canadian deactivation standards, the firearm may be deregistered.

I do not have s.12(2) on my licence that is why I can't import. You on the other side...
Click to expand...

So you'd charge more then Marstar is what you're saying.
 
Johnone : i ordered the combo.... Thanks a lot ! It will be very nice to have an ak74 ! There is maybe assh*le here... But im pretty sure than 98-99% of people here appreciate your products and your deals.

I little suggestion : a bonus for your good client! After X purchases... A little gift!
 
If there was a combo with just guns and not ammo it would seem more attractive to me... Maybe john has more tricks up his sleeve ?
 
You must log in or register to reply here.
Back
Top Bottom