Gevarm fore stock.

G

GevarmEdm

New member
EE Expired
Rating - 0%
0   0   0
Location
Edmonton
Good morning men, just wondering if there any place in Edmonton Area that does Stocks for a old Gevarm. I need a new fore stock, Thank you for your input.
 
"...that does Stocks..." Does what for stocks? You're going to have a hunt for Gevarm parts as they haven't been made for eons, but try Western Gunparts and Gunparts, Stateside.
 
Is the gun complete except for the wood foreend. ??? Does it require additional parts to make it shoot?
 
If it is an E2 take down Gevarm it is not just a piece of wood under the barrel to put your hand on.
The barrel is held in the receiver by the front stock . The stock screws to the barrel & the stock screws to the receiver.
The gun will not function without it .
 
That was my point, you need to have the additional receiver parts or try and copy someone's parts. I imported gevarm guns, parts and accessories from the factory until the firearms act changed in France and they decided to close down the factory. Many other firearms manufacturers did the same thing.
 
#1bcshooter said:
If it is an E2 take down Gevarm it is not just a piece of wood under the barrel to put your hand on.
The barrel is held in the receiver by the front stock . The stock screws to the barrel & the stock screws to the receiver.
The gun will not function without it .
Click to expand...

I'm aware of this, I have one. I've had it, and many others, over the years.
My response was to the OP's request for a stock. I interpreted it as the wood.
 
You must log in or register to reply here.
Back
Top Bottom