Out of smk and scenars I would pick smk, little higher bc, easier to tune, can be used for hunting and bit cheaper/easily available. But Berger is apparently a different animal. From the info I got from some experts(including guys at ATRS) they are finicky, even hybrids are picky but if you can tune them before burning your barrel they can be very accurate, can be used for hunting, better through transonic zone(if you shoot that far), less drop and wind drift coz of higher BC and little expensive and very low availability. Still not sure which way to go.
92gr Retumbo under 300gr Berger Hybrid 3/4 inch @ 200yds
99gr US869 under 300gr SMK 1 inch @ 200yds
103gr US869 under 300gr SMK 1 inch @200yds
Shot through my DTA SRS.
I have some more recent data using the 300gr Berger Hybrid OTM but it's at home. This is just what I have stored in my phone.
I like Retumbo, but haven't been able to get it locally for months.
92gr Retumbo under 300gr Berger Hybrid 3/4 inch @ 200yds
99gr US869 under 300gr SMK 1 inch @ 200yds
103gr US869 under 300gr SMK 1 inch @200yds
Shot through my DTA SRS.
I have some more recent data using the 300gr Berger Hybrid OTM but it's at home. This is just what I have stored in my phone.
Do you happen to have any velocity numbers for these loads i'm using 92gr retumbo currently and have thought of trying us869.
I am planning on using the Bergers, I bought 4 boxes of 500PC (impulse buy) but have been too busy to play with.
I typically shoot the 250gr Scenars, my gun loves them.
If you don’t mind sharing your other Berger data I would greatly appreciate it.
http://www.bergerbullets.com/update-regarding-the-338-hybrids/ts says on the Bergen web site that the hoter load might cause the nose to deform



























