Yesterday was the cutoff point for production run #2 of Modern Sporter receiver sets, orders submitted today and going forward will be part of production run #3.
We are still sorting out how many left over F/A uppers we will have available once we have all of run #2 lowers complete. Any extra's will be used for the beginning of run #3 lowers making it possible that when the lowers are ready to go, it could be a complete set.
The production plan is once we are finished the F/A uppers that we are currently machining we will retool to produce the lowers for run #2 and then keep going to machine the lowers for run 3. Once this is done then we revert to making SS uppers which we are expecting to get started on around Christmas. This would make for SS uppers and run 3 lowers being ready to start shipping in the early part of 2020.
We DO NOT have a concrete timeline this far in advance, but to date we have been able to keep within our projected dates.
Due to increases in the cost of materials and day to day costs of running the shop (like a 50% increase in utility costs) we have had to raise the prices on the SS uppers and lowers by approx. $50.00 per part. F/A uppers will remain at the same price as they currently are as we had already figured in the increased cost of materials and production when we established the price on them.
SS uppers are now $525.00 and lowers are now $560.00 with F/A uppers remaining at $625.00
Minor changes have been implemented as follows.
SS uppers revert to the standard ejection port size and we have modified the rear hook so that more triggers are easily compatible. the front of the upper has been thinned out slightly for better mag compatibility.
The thickness of the back of the trigger guard (in front of the pistol grip) on the lowers has been increased a few thou to better align the hole for the safety detent and spring with the hole in the pistol grip to allow the use of standard safety detents and springs. Due to this we are not threading that hole to use our ball bearing and set screw system. The area that supports the buffer tube has also been thinned to allow A2 style buffer tubes to capture the buffer retaining pin without modification.