N/R CZ Bren 2 in 7.62x39 W/ TWO Barrels Complete

Dlask Arms

Dlask Arms

CGN Ultra frequent flyer
Business Member
Rating - 100%
51   0   0
Location
Delta, BC
We just got some 7.62 blanks in this happens to coincide with the distributor having stock of the 11 inch version of CZ Bren 2 in this caliber as well.

I have made a listing on our website to gauge in N/R versions of the rifle. Here is what we have in mind :

We will bring in a small batch of the rifles, remove the factory 11 inch barrel and keep it intact with all of it's factory parts. We will then install a complete drop-on 18.75 inch N/R barrel with our trunnion, gas block, gas regulator, piston head, piston shaft and recoil spring. This would be a true two barrel, convertible rifle.

Out the door the rifle from our shop will be NON-RESTRICTED. Should you choose to put the factory 11 inch barrel back on then YOU are responsible to change the status of the rifle back to Restricted.

Cost for the complete set up is $4,000, not including shipping to you or taxes for your particular province.

Find the link to these on our website here :

https://dlaskarms.com/product/cz-bren-2-ms-in-7-62x39-caliber-n-r-comes-with-two-barrels/
 
Great price.
Nobody even comes close. It seems you guys are the only ones worldwide making aftermarket gas system parts.

Very happy with my NR 5.56 conversion from you.

So the barrels will be headspaced against the bolt and you can swap without concern?
 
Hello Leigh,

Is this something we can do at home in terms of switching between two different barrel?

How are the cycling issue with the 7.62x39? I know it is a known issue with CZ, but has it been resolved with the NR barrel?
 
I want to take an 18” 7.62 Bren deer hunting. I think that would be a lot of fun. Seen guys posting pictures hunting with their wk180c’s. As the kids say, such a vibe.
 
misterplinker1 said:
Great price.
Nobody even comes close. It seems you guys are the only ones worldwide making aftermarket gas system parts.

Very happy with my NR 5.56 conversion from you.

So the barrels will be headspaced against the bolt and you can swap without concern?
Click to expand...

Headspace is correct for both barrels. Just do the 'ol swaperoo betwixt the two and away you go.
 
JayCorbett said:
pistol length gas system won't cause any issues?
Click to expand...

We will be making rifle length pistons and more than likely the N/R barrels will have the rifle length system complete. But honestly it's all in how the rifle is gassed if you use the carbine length. They work either way.
 
Unstoppablem said:
Hello Leigh,

Is this something we can do at home in terms of switching between two different barrel?

How are the cycling issue with the 7.62x39? I know it is a known issue with CZ, but has it been resolved with the NR barrel?
Click to expand...

If you know how to turn a screw driver (Torx) then you'll be fine. The original U.S. 7.62 guns had some funky issues but those were easily resolved. Ours will be 100% made and tuned by us and test fired before leaving the shop.
 
Loosethoughts said:
I will whip that credit out so hard if this offer ever comes out in 223/556. Congrats to anyone looking for 7.62, this is an awesome deal.
Click to expand...

Negatory with the pricing. We can only offer these at this price because the wholesaler is having a special on the stock rifles. Once that special ends the price goes up roughly $500 or more depending.
 
Dlask Arms said:
We just got some 7.62 blanks in this happens to coincide with the distributor having stock of the 11 inch version of CZ Bren 2 in this caliber as well.

I have made a listing on our website to gauge in N/R versions of the rifle. Here is what we have in mind :

We will bring in a small batch of the rifles, remove the factory 11 inch barrel and keep it intact with all of it's factory parts. We will then install a complete drop-on 18.75 inch N/R barrel with our trunnion, gas block, gas regulator, piston head, piston shaft and recoil spring. This would be a true two barrel, convertible rifle.

Out the door the rifle from our shop will be NON-RESTRICTED. Should you choose to put the factory 11 inch barrel back on then YOU are responsible to change the status of the rifle back to Restricted.

Cost for the complete set up is $4,000, not including shipping to you or taxes for your particular province.

Find the link to these on our website here :

https://dlaskarms.com/product/cz-bren-2-ms-in-7-62x39-caliber-n-r-comes-with-two-barrels/
Click to expand...

hey Leigh
the process you described (("" We will then install a complete drop-on 18.75 inch N/R barrel with our trunnion, gas block, gas regulator, piston head, piston shaft and recoil spring. This would be a true two barrel, convertible rifle))"

Is this basically the same process that the 223 versions went through that were reclassified by you?
 
Zastava said:
hey Leigh
the process you described (("" We will then install a complete drop-on 18.75 inch N/R barrel with our trunnion, gas block, gas regulator, piston head, piston shaft and recoil spring. This would be a true two barrel, convertible rifle))"

Is this basically the same process that the 223 versions went through that were reclassified by you?
Click to expand...

No. We re-used the original parts from the factory barrel. Now, because we have the trunnions and gas blocks in hand, the original barrel stays complete with it's original CZ parts still installed, we don't touch it. For the N/R barrel we install our trunnion and gas block and other components, tune it, test it then ship it N/R to you with the complete ,unmolested factory barrel in the box.
 
You must log in or register to reply here.
Back
Top Bottom