1/2 x 28 Thread Tap

T

tbloggins

CGN Regular
Rating - 100%
85   0   0
Posted in EE and got no bites. I'm after a 1/2 x 28 tap for muzzle brakes, etc. Don't want to order from Brunells or Numrich, or any other place stateside. I'll pay s&h and Xpress post costs. Doesn't have to be new, but in good shape. PM me and we'll work something out, if you've got an extra. Could have used it this weekend:(
 
This may not be much help. but KBC Tools lists 1/2-28 in their "Special Thread Hand Taps" on pg. 104 of their online catalogue for about $16.00 but I believe they have a minimum order of around $25.00.

:) Stuart
 
the die is pretty much useless unless the barrel is already 1/2 inch at the muzzle. thats a job for a machinist and a carbide threading insert. then again it could be argued taping a brake is also a job for a machinist, that way the break could be zeroed out in a lathe and threaded so that the threads are concentric to the bore
 
iconfig said:
the die is pretty much useless unless the barrel is already 1/2 inch at the muzzle. thats a job for a machinist and a carbide threading insert. then again it could be argued taping a brake is also a job for a machinist, that way the break could be zeroed out in a lathe and threaded so that the threads are concentric to the bore
Click to expand...

Thanks. Way ahead of you, just need a tap. Already got the die.
225fb523.jpg
 
You must log in or register to reply here.
Back
Top Bottom