10/22 Auto Bolt

[srnm]

Does Anyone Know Where I Can Get A 10/22 Auto Bolt In The GTA? Please Dont Give Me A Online Dealer Because Im Only 18 So I Dont Have A Credit Card Yet.

 

[Nonus]

Do it yourself, with a dremel it takes all of two minutes to do.

 

[srnm]

I Would If I Could, But I Suck At Those Kind Of Things, I Would Probably Ended Up Screwing It Up, Plus I Dont Have A Dremel, Thanks Tho

 

[Onagoth]

As a point of fact, I had my first credit card when I was 18, and now, online transactions can usually be settled with (FRAUD ALERT) or EMT, both of which can be drawn directly from your bank account.

Hope this helps.

 

[beach_boy]

I used a chainsaw file and a vice to do mine. Doesn't take that long. It'll work just fine, just make sure you take care filing it down.

 

[cyclone]

Dumb suggestion , but try the E & E under "parts and bits". These have been popping up with increasing frequency.

 

[Ren]

A chainsaw file will for just fine as Beach Boy mentioned, I was worried about screwing it up too but it is very easy to do. Just make sure you test fit it often as you file it down.

 

[ki11ercane]

eBay is your friend. Go here.

 

[Mathieu]

You should seriously consider doing it yourself. It's so an easy mod and the fact that you did it yourself make the shooting even more fun...

 

[srnm]

Alright Guys You Talked Me Into It, Just Got Back From Home Depot And Got A Chainsaw File, Going To try Doing It Tonight, Thanks Guys

 

[johnsks]

been thinking about doing this myself to does anybody have a picture of what it should look like

 

[Mathieu]

Look in the Rimfire section. There is a pic in the tips & tricks!

 

[Nonus]

If you are going to do it make sure that you have the bent part of the spring that sits on the same pin as the hammer overtop the little notch on the bolt release. If I found that out before it would of saved me a lot of problems with the thing not working. Knowing that know it literally took me longer to set up the dremel than it took to do the thing.