10/22 Mannlicher
- Thread starter mullera
- Start date
sillymike
CGN Ultra frequent flyer
Mullera,
- How handy are you are sanding and finishing a stock?
- In how much of a rush are you to have it?
If you're OK with some sanding and finishing, and this is a not a short term project... Give a shout to Richards Microfit Stocks.
- Yes, call them. They usually pickup the phone and will (usually) return left messages... sending an email (unless they recently got new staff) will most likely get lost in the never-never-land.
They (or at least used to) offer some of their stock in mannlicher length. The few stocks I got from them, I felt I received nicer wood than expected.
- Did I say the order can take some time to show up? I've been told that instock items will ship rather quickly... special request... 6-9 months seems to be the norm.
If you search RimfireCentral, there's a guy who installed a 10/22 in their Monte Carlo sporter stock. Made the bull barrel match the length of the stock. I thought it looked pretty good.
I can't seem to find it (quickly) here's what a regular length barrel would look in a regular length rifle stock. A 12" barrel would be close to a flush fit. Or you can ask them if they can lengthen the stock...
http://www.rifle-stocks.com/BradCDGWal1022.JPG
- How handy are you are sanding and finishing a stock?
- In how much of a rush are you to have it?
If you're OK with some sanding and finishing, and this is a not a short term project... Give a shout to Richards Microfit Stocks.
- Yes, call them. They usually pickup the phone and will (usually) return left messages... sending an email (unless they recently got new staff) will most likely get lost in the never-never-land.
They (or at least used to) offer some of their stock in mannlicher length. The few stocks I got from them, I felt I received nicer wood than expected.
- Did I say the order can take some time to show up? I've been told that instock items will ship rather quickly... special request... 6-9 months seems to be the norm.
If you search RimfireCentral, there's a guy who installed a 10/22 in their Monte Carlo sporter stock. Made the bull barrel match the length of the stock. I thought it looked pretty good.
I can't seem to find it (quickly) here's what a regular length barrel would look in a regular length rifle stock. A 12" barrel would be close to a flush fit. Or you can ask them if they can lengthen the stock...
http://www.rifle-stocks.com/BradCDGWal1022.JPG
Hi there. I'm reasonably handy, and I have time, so taking on a project is not an issue for me. I also had no idea that Richards existed. I've looked into it a bit, and I'll be doing exactly as you said, and exploring what the Mannlicher options might be. I always figured there MUST be someone doing this kind of work. I hadn't been able to stumble onto this on my own though. Very much appreciated.
Brass balls
Regular
- Location
- Frozen wasteland to the north
I just sold my grey laminate Mannlicher 1022 tonight on g unpost. it sold for asking price of $900
I've had it for years and sits in the safe never shoot it so figured time to let someone else admire it.
I've had it for years and sits in the safe never shoot it so figured time to let someone else admire it.
Always love the look of them but never found one when k was actually shopping. I will same my LVT 10/22 is a decent little shooter out to 100meters. Averages around 1.5” 5 shot groupings on a low wind day with good ammo. Was also good enuff to manage rifleman in Mapleseed.
If you can fine a Mannlicher 10/22 I’d say get it. Try it out if you’re not happy you can swap your carbines guts over and try again. And if atill not happy I’m sure you can find a buyer.
If you can fine a Mannlicher 10/22 I’d say get it. Try it out if you’re not happy you can swap your carbines guts over and try again. And if atill not happy I’m sure you can find a buyer.
