100m Accuracy CZ Bren 2 11 Inch

J

johhny12gauge

CGN frequent flyer
Rating - 99.5%
216   1   0
I am curious to know what others have gotten at 100m for 5 shot groups with the CZ Bren 2 11 Inch .223.
From a seated position on a bench with the rifle resting on the magazine I've gotten:
-2.25 inch 55gr AE
-3 inch 75gr Frontier Match BTHP
-3 inch Campro 55gr hand loads with 26gn Win 781

Is this the upper limit of what it's capable of?

Thanks!
 
Last edited:
that's about right with 55gr AE. I generally get around 3 to 4.5 ish out to 200m You will never ever get Colt Canada MRR 11.5" or HK MR223A3 / HK 416 11" performance out of any other platforms with those 10 round 2MOA groups at 300m with good mil ammo ( the ones that particular system like). Gotta adjust expectations downwards.
 
Try it from a bag with a shorter mag... resting from the mag definitely wont help with seeing if it will shoot any better. I'd be curious to see what sort of shot dispersion you could get with the aforementioned.
 
For this kind of rifle if I can prop my rifle mono poding on a sand bag doing 3 to 4 MOA with 10 rounds at 60 rpm pace at 100m it is fine.
 
I didn't get an 11" semi to shoot groups at 100, lots of better options for that. But here is a 3 shot group at 25
Yds sighting in my red dot. It's now zeroed at 50
VideoCapture_20240109-070422.jpg
 

Attachments

  • VideoCapture_20240109-070422.jpg
    VideoCapture_20240109-070422.jpg
    49.6 KB · Views: 642
I got the gun for 3gun, longer barrels would have been better but I also wanted it for work training purposes ie CQB to simulate a Colt C8. I wouldn't be so focused on 100m accuracy if it wasn't for 3gun.
 
I did a follow up accuracy test today with a bipod and blocks for the buttstock. The rifle was the most stable I’ve ever shot. Using a 1-8 Bushnell scope I wasn’t able to shoot any better today then resting off the magazine and benched. Probably more shooter then gun but accuracy wise for me 2-3moa consistently is what I’m getting with a variety of ammo at 100 yards
 
I would say that's reasonable practical accuracy with non match ammo. the upside is it's a CZ so the platform itself is worthy. just for giggles try a box of FGMM 69 gr., I'm curious.
 
I’ve tried a box of Frontier 75g bthp match and it grouped no better then factory for me. The hits were more centred was all. I’ll be doing more accuracy testing.
 
I just re-zeroed a 11" with PMC M855 using a new scalar mount with an aimpoint Micro 2MOA. As a confirmation I mono-pod it on the magazine and busted out a 10 round group at rapid rate un-magnifiefd at a 20X20 trg at 200m. 7 out of 10 shots within a 5" circle the other 3 opened it up to like 10 to 12". I will say that this is more than acceptable for this sort of rifle using this sort of ammo.

So yeh, more than enough against motorized zombies unloaded from cattle cars....
 
Can anyone recommend a foregrip that fits into the single MLOK slot at the bottom (11 inch bren 2)? I bought a foregrip, only to realize that it won't attach :D
 
Has anyone else tried the Neoteric Designs Collapsping Buttstock for the CZ Bren 2? I have one on my 14" Rifle, but think that it would really shine on a 11" Barrel for maximum compactness.

20240607-224459.jpg


20240607-224638.jpg
 
You must log in or register to reply here.
Back
Top Bottom