10mm auto re-loads

I've been loading the 10mm since fall 1987 when the first Colt Delta Elites first came into Canada and I now have 4 10mm's Clt Delta Elite, G20, G29 and a 18.5" T/C Contender barrel.

If you go to the carbine load data on Glock Talk 10mm forum you will see my data/velocities.

In a 6" Barsto barrel I have safely reached 1850fps with 135gr Nosler HP's and from 5" barrels 200gr bullets too 1300fps...

I feel that IMR800X gives the highest velocities for any bullet weight but it is also the toughest powder to use requiring individual weighing of each load.

I also used 10mm's for ATC for about 4 1/2 years until the RCMP wouldn't allow me to have a semi-auto on my permit this last time.

The 10mm can do everything that any other standard production semi-auto round can do and everything they can't
 
S&W 1006 and I've got a glock 29 on the way. I'd sure like a 610 someday though. Starline brass and remington 155 jhps with 8gr.s unique. but I'm going to run some blue dot when I get my gear set up again.
 
Newbie to the 10mm party here!

I have been gathering components as well and have some old Hodgdon HS-7 powder I would like to try.
I know its discontinued now, but I still have the original reloading data. Anyone else have experience with this in there Glock loads?

ALSO: I cannot find 10mm brass nor Factory ammo anywhere, must have called a dozen places and sponsors,
if anyone can help a fellow 10mm elitist out, please send me a PM. I haven't even been able to shoot the G20 yet!
 
You must log in or register to reply here.
Back
Top Bottom