14.5"questar build

[kenjuudo]

There are only the two roll pins in the lower... you can buy the punches, and if you're going to be doing a number of builds that might make sense, but for just one or two builds you can use Vise Grips... I'd use more electrical tape than is pictured here, but otherwise...

A detailed description of the process (which is pretty simple really) is stickied at AR15.com here in the "Build It Yourself" forum (third post on the page):


http://www.ar15.com/forums/topic.html?b=3&f=4&t=226782

Yes Brownell sells them all, the last time I checked the roll pin holders and roll pin starter sets were back ordered. Sorry I don't know the stock number off hand but if you go to their web site and do a search for them under tools, you should be able to find them.

Just did a quick search on Brownells' site and it looks as if they are back in stock .

 

[emmab]

Use lots of tape on the lower to prevent scratches. It's quite simple to build an AR. Heres a family shot with the new arrival wearing her new gear. 14.5"M4 Questar/Rock River, 16" Armalite, 20" Colt A1 slabside, 20" Stag flattop

 

[kenjuudo]

Nice...!