2016 Shotgun of the Year: 1919 Match~ BACK IN STOCK!! *GENERATION 2*

Does this one load on a closed bolt? I'd like to use it for ducks and turrs but it would be a pain to only have the use of 2 rounds in the Mag and none in the chamber.
 
Alloy lower receiver is this aluminum or some cheap pot metal also is the buffer tube for rear stock replaceable would like to install my hydrolic recoil reducing buffer tube to reduce recoil
 
griffin86 said:
Just tried it, yes it does.
Click to expand...

I can certainly see one of these in my future then.

Wondering as above as well the lower material, doesn't seem to make mention of it. Very affordable upgrade, I'll say that. Maybe polymer would do me better with the chance of using it on salt water anyways. Gonna be cleaned the same either way so it shouldn't matter.
 
Last edited:
Awesome! May have to upgrade my Gen 1 to this!!!

Too bad they didn't include the two small issues with the Gen one though. That being, two raised sections on either side of the bolt release to protect it from being pressed when you place the shotgun down on the left side with the bolt open, and a better, larger, less rounded safety that you can easily flip with your thumb. The small, plastic, rounded top one that it comes with is difficult to use.

The other upgrades seem great!! My Gen one works perfectly! I'm taking it out duck hunting this weekend to see how it does! Hope they decoy well as I'm thinking that with the short barrel, you aren't going to be making any clean shots over about 25 yards without some kind of aftermarket long range steel choke installed.

Ian
 
Smitsauce said:
Awesome! May have to upgrade my Gen 1 to this!!!

Too bad they didn't include the two small issues with the Gen one though. That being, two raised sections on either side of the bolt release to protect it from being pressed when you place the shotgun down on the left side with the bolt open, and a better, larger, less rounded safety that you can easily flip with your thumb. The small, plastic, rounded top one that it comes with is difficult to use.

The other upgrades seem great!! My Gen one works perfectly! I'm taking it out duck hunting this weekend to see how it does! Hope they decoy well as I'm thinking that with the short barrel, you aren't going to be making any clean shots over about 25 yards without some kind of aftermarket long range steel choke installed.

Ian
Click to expand...

Looking at buying one of these, but with the 18.5" adverts mk10 I was able to drop a turky at 60 yards. Carlson Mobil chokes are a difference maker in these guns no need for the 30" barrel to get decent groupings at 50yards. Not to mention spend a few bucks and get some high quality ammo and you will have no issues smoking ducks, formation geese that's another story but I digress lol. Enjoy!!!
 
Is the forward charging handle removable in any way or is it perminant? I wanted one of these shotguns but not with the charging handle as it is a eye sore for me. I'm also lefthanded so I wouldent even use it.
 
Foxer2373 said:
Looking at buying one of these, but with the 18.5" adverts mk10 I was able to drop a turky at 60 yards. Carlson Mobil chokes are a difference maker in these guns no need for the 30" barrel to get decent groupings at 50yards. Not to mention spend a few bucks and get some high quality ammo and you will have no issues smoking ducks, formation geese that's another story but I digress lol. Enjoy!!!
Click to expand...

That is great news! I am definitely going to be buying some better steel chokes for it soon!
 
7.62Operator said:
Is the forward charging handle removable in any way or is it perminant? I wanted one of these shotguns but not with the charging handle as it is a eye sore for me.
Click to expand...

Seconding this. Also wondering if it's possible to remove the rail section on the opposite side to make it a bit more symmetrical.
 
TI: Very interested in the rifle. A few questions:

1. Is the metal lower factory made or made by others and retrofitted later ? What is the material ? Is it the same as the upper ?
2. Are the sights plastic or metal ?
3. How is the warranty handled ?
 
Nice looking shotgun. IIRC there was another sponsor who brought in a Turkish shotgun made what seems like a hundreds of YouTube videos extolling it's virtue and hundreds more telling people how to get it to work. Not saying this will be the same but been burned by fancy advertising not once but twice. So I'm going to save my Pesos and buy a Beneli one day. Might not look cool I know I know it will be reliable out of the box.
 
You must log in or register to reply here.
Back
Top Bottom