ackertjosh
Regular
- Location
- Bruce County Ontario
Hey All new to the Form and am really liking it here.
So about a year ago now i got into the reloading and worked with a bunch of loads for the 22-250. I myself shoot a CZ550 LUX and my Father shootes a Tikka T3 both in 22-250. These are our coyote rifles so i devised a 40gr V max load to help with pelt damage. It worked perfactly. All coyotes shot the past winter had no exit wounds and pin hole entrance and the coyote was dead before it hit the ground.
What im worried about is the Barrel life of these rifles do to the the fact is i can only get accracy at Super high volocites.. My load is a 40gr Vmax ontop of 40gr of Varget with a Winchester Magnum Primer. I have no idea my volocity but im guessing it should be around the 4300 fps just going from the listed max load in the 8th Edition of the Hornady hand book is 38.4 gr of varget at 4100fps, and every extra grain added accounts for 100fps.
So based on that data what would everyone else do? Change up the load if Barrel life is an issue or just shoot it since were having success.. What are your favorite pet loads?. All is apprechated and i also reload for the .222 and 6.5x55 so if anyone would like to know what i got for load data for those dont hisitate to ask and maybe you could share yours with me.
Thanks again
Josh
So about a year ago now i got into the reloading and worked with a bunch of loads for the 22-250. I myself shoot a CZ550 LUX and my Father shootes a Tikka T3 both in 22-250. These are our coyote rifles so i devised a 40gr V max load to help with pelt damage. It worked perfactly. All coyotes shot the past winter had no exit wounds and pin hole entrance and the coyote was dead before it hit the ground.
What im worried about is the Barrel life of these rifles do to the the fact is i can only get accracy at Super high volocites.. My load is a 40gr Vmax ontop of 40gr of Varget with a Winchester Magnum Primer. I have no idea my volocity but im guessing it should be around the 4300 fps just going from the listed max load in the 8th Edition of the Hornady hand book is 38.4 gr of varget at 4100fps, and every extra grain added accounts for 100fps.
So based on that data what would everyone else do? Change up the load if Barrel life is an issue or just shoot it since were having success.. What are your favorite pet loads?. All is apprechated and i also reload for the .222 and 6.5x55 so if anyone would like to know what i got for load data for those dont hisitate to ask and maybe you could share yours with me.
Thanks again
Josh


















































