ackertjosh
Regular
- Location
- Bruce County Ontario
Hello
So a friend of mine picked up a Savage Model 219 in 22 Hornet. Great little rifle!!
So When we were plinking away I noticed right away that the brass was completely different then the unfired brass.. I went directly to my Hornady book and seen that this gun has been re chambered to 22K hornet but was not marked...
Is there a good brand of neck sizing dies a person should buy for this? as well as a seating die.. I was thinking redding and did find some on Sinclair... What do all you think..
Also i will be reloading for him and was thinking 40gr Vmax with about 11gr of Lil Gun...
I don't know the rate of twist but I'm thinking its 1-14 or 1-16.. will that stabilize a 40gr bullet?
Thanks
Josh
So a friend of mine picked up a Savage Model 219 in 22 Hornet. Great little rifle!!
So When we were plinking away I noticed right away that the brass was completely different then the unfired brass.. I went directly to my Hornady book and seen that this gun has been re chambered to 22K hornet but was not marked...
Is there a good brand of neck sizing dies a person should buy for this? as well as a seating die.. I was thinking redding and did find some on Sinclair... What do all you think..
Also i will be reloading for him and was thinking 40gr Vmax with about 11gr of Lil Gun...
I don't know the rate of twist but I'm thinking its 1-14 or 1-16.. will that stabilize a 40gr bullet?
Thanks
Josh


















































