22 Magazine ID Help Please

[88 man]

Hi Everyone. I'm hoping someone can identify this mag ? I've had it a long time and never had a rifle for it so no idea what it's for. No markings on it at all.
Any help would be great !
Thanks !

 

[struff55]

possibly a Gevarm 22

 

[88 man]

possibly a Gevarm 22

Just looked that up and looks like that's what it could be for sure. Thank you !

 

[r.j.medals2]

Could you post a photo of the spine/back

 

[88 man]

Could you post a photo of the spine/back

 

[birdbuff]

Possibly for a lakefield model 64?

 

[88 man]

Possibly for a lakefield model 64?

Definitely not I have a couple of them

 

[Daniel G. Banting]

I would not bet my life on it but I'm in agreement with the Gevarm. Hopfully, somone with the actual gun and a functional mag will chime in.
dgb

 

[9.3mauser]

It might be an aftermarket Gevarm. The baseplate and round-counter holes are different on my factory mags. The left feed lip on the mag should be slightly longer than the right side. That serves as the ejector.

 

[17asleep]

Could also be a Marlin. I don't have one in front of me, but it is very similar.

 

[unstableryan]

I was thinking Marlin without going downstairs. If it is a gevarm I'll give you 50 bucks for it

 

[88 man]

It might be an aftermarket Gevarm. The baseplate and round-counter holes are different on my factory mags. The left feed lip on the mag should be slightly longer than the right side. That serves as the ejector.

Just looked and yes the left feed lip is a little longer than the other as you said so I'm pretty sure the mag is for a Gevarm now. I was told some mags didn't have stamping on the side or bottom and with a couple different models some had holes on the side others had a slot like mine does. I'm thinking it's an original mag when I compare it to the aftermarket mags made by Triple K as those mags don't have hole or slots in the sides they are solid.
I'm going with factory original on this mag !
Thanks !

 

[guntech]

Too bad it isn't about 4 inches longer...