25-06 Rem and 110 grain Interbonds

[Bluffton Bill]

Any thought on what powder to start with? The two Hornady manuals I happen to own do not have the Interbonds in there. I tried a full load of H870 with poor results.

I am toying with either IMR 4831, H4831 SC, or H4350.

Any help finding a starting point would be great.

 

[Bent Barrel]

25-06 load

I shoot the 115 Barnes in my Sako 995 with 59.5 grs Rel 25--1/2 "---the AB is 5 grs lighter but start at 57 and work up---Safety first !!

 

[beretta boy]

I've used H4831 to good effect in the 25-06 as well as both IMR & H4350 and RL19.
Next loads I'm about try are with Hodgdon's Hybrid 100V.
Interpolating data between 100gr. and 115/117 loads hasn't given me
any problems so far.
Save the H870 for the big magnum cases like the 264 Win Mag.

Besides the various manuals I have, I often refer to bot the the Hodgdon's and Nosler Internet Reloading Data sites. Nosler's site has recommendations for their 110 gr. Accubond.

Like all manuals and data recommendations, they are still just guidelines and as many have noted, there are discrepencies amongst the various sites. An old Speer manual I have has many loads a grain or two above today's maximums shown in most manuals. Start below the max listed and work carefully upwards.

 

[sureshot66]

I have an account with Loaddata. I did it for just the one year but now have all the reloading information I could ever want and there is tons of info on the 25-06.

 

[Cinch]

I've had excellent luck with IMR4350 and 110gr Accubond.

 

[Charlie38]

Here are 110gr ACCUBOND loads, should be close, the Interbond is in the Hornady 8th edition. If I find it tonight will post loads.

110gr Nosler ACCUBOND, 25-06 Rem.

IMR 4831 start load= 47.0gr(2996fps) - max 51.0gr(3177fps) (most accurate powder)

H4831 SC start load= 47.0gr(2950fps) - max 51.0gr(3131 fps)

No H4350 data
IMR 4350 start load= 45.5gr(2955fps) - max 49.5gr(3183fps)

From Nosler#6 manual

 

[Charlie38]

I just found my copy of the Hornady 8th edition, it says to use 117 gr bullet data for loading the 110 Interbond bullet.

 

[dan belisle]

I use RL22 in mine. - dan

 

[john-brennan]

25-06

I used Retumbo and it kicks ass in my old 25-06 and 257 weatherby, great accuracy (.5'') and highest velocity of all the powders I have tried. (H4831, RL25, H4350, RL22,ect.) IMR 7828 also perfomed well also.

 

[dthunter]

Retumbo works great!, and R22 with 120gr. Bullets.
The 110 does fine also.