Hey guys.
just finished my case prep on a bunch of new 270 win brass, and started searching through some manuals looking for a load using rl 22 and 140 ab. the problem i'm having is that after looking through four different manuals, one dosen't list rl22 at all, and the other three have quit the difference in the listed maximums and minimums.
for example:
sierra min 49.9 max 56.4
lyman min 52.5 max 58.5
lee min 57.8 max 60.0
nosler not listed
As you can see, the min listed in the lee manual is greater then the max listed in the sierra manual.
the reason i was wanting to use rl22 is because i have alot on hand as i use this in my 300wm, and figured it would be easier to use the same powder.
Anybody care to share their personal load of rl22 for the 140 grainers?
any help would be appreciated.
just finished my case prep on a bunch of new 270 win brass, and started searching through some manuals looking for a load using rl 22 and 140 ab. the problem i'm having is that after looking through four different manuals, one dosen't list rl22 at all, and the other three have quit the difference in the listed maximums and minimums.
for example:
sierra min 49.9 max 56.4
lyman min 52.5 max 58.5
lee min 57.8 max 60.0
nosler not listed
As you can see, the min listed in the lee manual is greater then the max listed in the sierra manual.
the reason i was wanting to use rl22 is because i have alot on hand as i use this in my 300wm, and figured it would be easier to use the same powder.
Anybody care to share their personal load of rl22 for the 140 grainers?
any help would be appreciated.