- Location
- Prince Albert, Sk
I have succumb to the fact that that my trials of two 300WM Vanguards just don't like the heavy bullets.Yesterday was with what I figured was a usable load with 190 LRAB.
Had would I thought was a decent load after a couple of tests , went out to sight-in in yesterday for a 250 yard zero @ 250 yards in good conditions.Temp around 0C , mild breeze.
The load particulars are 75.5 gr of 7828 190 LRAB , Hornady brass, 215 primers , 3.400" COAL, 3063 ft/sec.
This is the correct orientation of the target.
Did two targets , both quite similar , 10 shots total about 30 minutes to do those shots, all cooled down between shots to get the best cold barrel sight in possible.
I guess it will have to be a custom barrel to get the results I am looking for.
Not posting this here to hear the bedding/pressure point/floating/shooter/loading technique is at fault.
Had would I thought was a decent load after a couple of tests , went out to sight-in in yesterday for a 250 yard zero @ 250 yards in good conditions.Temp around 0C , mild breeze.
The load particulars are 75.5 gr of 7828 190 LRAB , Hornady brass, 215 primers , 3.400" COAL, 3063 ft/sec.
This is the correct orientation of the target.
Did two targets , both quite similar , 10 shots total about 30 minutes to do those shots, all cooled down between shots to get the best cold barrel sight in possible.
I guess it will have to be a custom barrel to get the results I am looking for.
Not posting this here to hear the bedding/pressure point/floating/shooter/loading technique is at fault.
