300H&H powder suggestions

[crazy_davey]

What is your go to powder for 300H&H loads with a 200g bullet?

I have been testing over the past while with IMR4350 in my Browning and Winchester. Had some good results out of the Browning with a 200g TSX and 4350 but it has now left the safe onto another good home. Started working up loads in the Winchester with the same powder and bullet but have not been as lucky so far(not finished yet).

Just wanted to hear what you have been using or what you like for powder.

Thanks!

 

[agilent_one]

I did up some 200gr (partition, I think) loads for a buddy a few years back that worked out alright. I used RL-19, but can't remember the charge weight offhand. It will be in my logbook, though - if you want it.

 

[crazy_davey]

I thought about trying RL-19. I know a guy with some extra 19 I could try out.

Thanks Mike!

 

[mbogo3]

There's always H4831 or IMR?Harold

 

[Eagleye]

Reloder 22 is the go-to powder with the 200 grainer. Right around 72 grains [work up to this from below] gets that big 200 right along in that fine old chambering. Eagleye.