.32 ACP Skorpion!!!!!

Curtton said:
Ricohman: the hammer is meant to be between the two sears but not contacting both at the same time.

the forward sear releases the hammer , when the hammer comes back down the rear sear hold the hammer down till you release the trigger forward, immediately the forward sear re-engages the hammer .

The sears and hammer contact points shoud be parallel , if not then you should send it in as these parts are machined , unlike stamp parts which are easily bent back . Imho.
Click to expand...

I get it. They are not parallel. Close, but not quite. And the part is machined. I thought of dressing the end that contacts the disconnect sear as that is the end that hangs up. But then the hammer is not true to the main sear and in time that could cause problems. It's a new gun from Tactical and I sent them an email. I don't expect it to be a problem getting another one, but I thought if this was a simple problem endemic to the Skorpion maybe there was an easy fix and I wouldn't have to go through the hassle of sending it back.
I'll get some pics up later.
 
ricohman said:
I get it. They are not parallel. Close, but not quite. And the part is machined. I thought of dressing the end that contacts the disconnect sear as that is the end that hangs up. But then the hammer is not true to the main sear and in time that could cause problems. It's a new gun from Tactical and I sent them an email. I don't expect it to be a problem getting another one, but I thought if this was a simple problem endemic to the Skorpion maybe there was an easy fix and I wouldn't have to go through the hassle of sending it back.
I'll get some pics up later.
Click to expand...

First problem I've seen in the Zastava version.
 
Here are a few pics of the hammer and sears. You can see the hammer is canted to the left and this angle is the cause of it hanging up. Think I could just bend the hammer a tiny bit? It's close to working perfectly, just every now and then it hangs up.




 
If any of you 32acp Skorpion owners need more magazines... Corwin Arms has 4 packs of 5/20 mags for $87.75.

corwin-arms said:
Vz.61 Skorpion 32 ACP 5/20 Magazines 4 PACK $87.75
New Unissued Stock. Will work in Vz.61 by CZ, CSA and Zastava Production. May have minor scratches from long term storage

http://https://www.corwin-arms.com/product/vz61-skorpion-32-acp-520-magazines-4-pack

Vz.61 Skorpion 32 ACP 5/20 Magazine $24.87

http://https://www.corwin-arms.com/product/vz61-skorpion-32-acp-520-magazine

SAM_1250_zpsh2vqb1ic.jpg

SAM_1251_zps4altags3.jpg
Click to expand...
 
Just snagged a Zastava M84 off the EE.

Was going to order the S&B ammo, but noticed that the ZVS Holdings ammo out of Slovakia is about 5 bucks cheaper a box.

Not looking for match accuracy here, so has anyone had any experience with the ZVS ammo? Wouldn't want to order 1200 rounds and have issues like the Winchester White Box stuff.
 
i ordered a case of the zvs ammo, i have fired half of it, and i only had one light primer strike that fired 2nd time around, other then that no problems, and i had a pretty much same accuracy compared to the S&B ammo. i would recommend the purchase.
 
bfiles said:
Cool^^^
Thx man
Click to expand...

No problem! Mine arrived today. 6 days from order to at my door is actually great, considering I'm as far east as it gets.

I had no idea how small this round actually is until they arrived today, I actually thought they may had mistakenly sent me the wrong amount when I saw the box. I feel like I should have ordered another 1200 haha.

IMAG0414.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom