- Location
- Chilliwack
Lets build one. Give me your thoughts.
338-06
- Thread starter bearhunter338-06
- Start date
burnt_servo
CGN Ultra frequent flyer
- Location
- right in the middle of b.c.
find a savage axis on sale , work over the trigger , install a boyds stock and then splurge on a really nice prefit barrel and have lots of money let for a even nicer scope .
add about 600.00 and do the same with a rem700
unless you have reamers already , myself , I would push the shoulder as far forward as possible and give it a 40 degree shoulder . a case capacity of around 80 grains of water should be possible , 338 win mag is around 86 grains of water .
add about 600.00 and do the same with a rem700
unless you have reamers already , myself , I would push the shoulder as far forward as possible and give it a 40 degree shoulder . a case capacity of around 80 grains of water should be possible , 338 win mag is around 86 grains of water .
Last edited:
notsorichguy
CGN Ultra frequent flyer
- Location
- The city that rhymes with fun
I built one off a Rem 700.
All in, by the time the final was tallied, I spent $2700 on a gun I already owned (including glass).
At the time, for $3000 I coulda bought a cooper!
I would do it again, but you should have all of the available info.....
PS; if you reused all of the "stock" items on a NIB SPS DM M700, all you would be looking at was $1000.
All in, by the time the final was tallied, I spent $2700 on a gun I already owned (including glass).
At the time, for $3000 I coulda bought a cooper!
I would do it again, but you should have all of the available info.....
PS; if you reused all of the "stock" items on a NIB SPS DM M700, all you would be looking at was $1000.
