338 Lapua Dies

[Big Mike]

Hi guys I am looking for a set of 338 Lapua dies. Anybody know where to look and which ones to get?
Thanks

 

[Armafix]

My one stop store for this kind of stuff is Sinclair International. They're not the cheapest but they have what you need. And they ship to Canada.

Kazimier

 

[Shooter ----/]

WSS carries Redding and RCBS. Not all locations stock them so be prepared to order them. Should take anywhere from 1 - 3 weeks.

 

[Missing Something]

I personally like RCBS dies... Wolverine has them. I am sure that TSE would also have them.

 

[Big Mike]

Thanks guys I will call those places. I was looking for RCBS and WSS was sold out.

 

[rcan]

I'd try Midsouth Shooters supply. Had a great supply of Redding Comp stuff including the bushings in the size I needed. Very good prices and ships to Canada.

 

[Big Mike]

Got some RCBS dies coming from TSE. Thanks for the help. Im loading for the Remington 700 in 338 Lapua. Would RL 25 be good for that? I will be using Sierra Matchking 300gr and Federal 215 primers? Hard to find load data for this powder. It may be a tad slow for the Remingtons shorter barrel. I also have H4350 and IMR 4350. Any help would be appreciated.

 

[Mystic Precision]

I can also help you with all common brands in conventional and match type dies.

Jerry

 

[juanvaldez]

sinclairs is good, ask for shipping quote first, i've gotten a few surprises

 

[sunray]

"...RL 25..." There are 2 loads on Reloader's Nest. One of 'em is for a 300 grain MatchKing. Reduce by 10% and work up. Geez, that cartridge uses a lot of powder.
http://www.reloadersnest.com/frontpage.asp?CaliberID=140

 

[Big Mike]

ya I saw those on Reloadersnest. I wasnt sure if that was a max load. maybe I will back that down a bit and start there. I'd love to hear from some guys that have these rifles what they are using for loads.

 

[peterdobson]

We have RCBS and Forster and Lapua 300 grainers!

 

[cycbb486]

Gunstop Reloading

sinclairs is good, ask for shipping quote first, i've gotten a few surprises

in Minnetonka is by far better in regards to shipping and service. Tell John that Calvin from MB sent you there.

CBY

 

[LloydM]

ATRS in Calgary sells redding dies and most likely stocks .338 Lapua. Redding is the only brand of dies I use; I don`t have a standard .338 Lapua, but my Lapua AI dies work great for me.

 

[PEI ROB]

Forster dies are good dies. I got my 338 Lapua set off Hirsch Precision, aka peterdobson, a cgn dealer.

 

[CanuckWR]

Playing with my new .338 lapua redding dies today. I have rcbs and lyman in other calibers and the redding are quicker to adjust with no tools than my other dies. My first impression is favorable so far. Lots of room to use a longer throat or long bullets in the adjustment! Almost too much.

 

[HeadDamage]

Lee doesn't make neck dies for 338 lapua do they?