.338 Winmag 225 Gr Swift A-Frame Wound Effects on Bull Moose - Graphic

passengerseven

CGN Regular
Rating - 100%
73   0   0
Location
Alberta
Had the opportunity to take a bull moose last year at 192 meters (209 yards). It was a cold, hollow morning with no wind and a light frost layer on the ground. After settling into my watch I let out a couple of cow calls only to hear the familiar "Whoaaa" response from about 600-700 yards away. I softly called twice more and then heard the cracking of twigs and branches as the bull started making his way toward me.

I shoot a Sako 75 chambered in .338 winmag and use Remington Safari Grade 225 gr Swift A-Frame ammunition. As the moose stepped out of the forest into view he turned broadside. I ranged him and then put the cross hairs just behind the front left shoulder as I prefer double lung shots so the shoulder is not destroyed. As the round hit him he broke into a trot along the edge of the woods. I chambered a second round, put the crosshairs where they belong and squeezed off a second shot. He stopped trotting, stood there for about 10 seconds before the hind legs started to wobble, and then fell over. I love it when a plan comes together.

We got the canoe, crossed the creek and went to dress the moose. After skinning and disassembly I snapped a few photos of the bullet wounds to show what a through and through looks like. Keep in mind that the ribs are about 2" wide. The bull was dead after the first shot but didn't realize it until the second round made the point.

The first pic is the bull on the ground.

The second picture shows the inside ribcage view of the entry wounds. Rounds were about 3-4 inches apart on entry. The 3rd picture shows the exit wounds on the right side of the ribcage, bullets went through and through about 10 inches apart on exit.

Rib bone fragmentation effect on the lungs was profuse and devastating. There was no loss of meat.

Fourth picture shows entire rib cage from behind to give perspective.

Last picture is of my hunting buddy, elbows deep in blood, who graciously did most of the disassembly so that I could photograph the sequence. Thanks Darbdarb. Cheers,

-P7

IMG_2046_zps8ad9ca91.jpg

IMG_2014_zpsfdf2f397.jpg

IMG_2015_zpsab893b38.jpg

IMG_2017_zps154af766.jpg

IMG_2057_zpsdd117b14.jpg
 
Much better choice (.338) over the 7mm-08 and .257 Wby or .243 crowds when it comes to serious moose stopping power.
Dont get me wrong the after mentioned rounds will do it, but the animal deserves the best stopping power for a clean kill.
Thanks for sharing the results..how where the steaks btw?
Rob
 
Great job and congrats on the nice bull moose. Thumbs up for using the big cartridge for the big animal.......well done!
 
Those bullets really seem to do the job.

I've shot lots of moose with .338 win mag, mostly using 250 grain Sierra gamekings. Your exit wounds there are definitely larger than you get from a gameking, they're tough bullets, almost to a fault, and broadside rib shots usually give exit wounds about a third smaller, even if you hit a rib directly on the way in.

I've switched over to 225 grain SST's, at least for a while, as I've heard from friends they are devastating on broadside shots, while still offering enough penetration and weight retention for quartering shots on big moose.

Doesn't really seem like there is a "wrong" bullet for the .338 win mag for moose, however.
 
Nice, it's my first year in Alberta, and my first year getting skunked in a long time :(
Ivor
 
Good Job my friend...

Hunted moose, elk, and deer for the past 30 plus years with a .338 WM. Truly a great all around caliber. I always use Federal 210 Nosler Partitions with very similar results. Minimal meat loss on deer when hit right.

Thanx for sharing...
 
I just bought a Win Mod 70 Extreme Weather SS in .338 Win Mag but it's still unfired and in the box. Your story is very inspiring. Good job!
 
Those bullets really seem to do the job.

I've shot lots of moose with .338 win mag, mostly using 250 grain Sierra gamekings. Your exit wounds there are definitely larger than you get from a gameking, they're tough bullets, almost to a fault, and broadside rib shots usually give exit wounds about a third smaller, even if you hit a rib directly on the way in.

I've switched over to 225 grain SST's, at least for a while, as I've heard from friends they are devastating on broadside shots, while still offering enough penetration and weight retention for quartering shots on big moose.

Doesn't really seem like there is a "wrong" bullet for the .338 win mag for moose, however.

Those Swift A-Frame bullet retain almost all their weight and mushroom to 2 1/2 times their original diameter and almost always pass through and through. I have only recovered one bullet from over 17 bull moose kills and that was a frontal shot from 350+ yards and it was recovered embedded in the hind end under the skin. Bullet was fully intact and perfectly mushroomed. I have it somewhere and will see if I can post a pic.

Those entry exit wounds were almost 4 inches in diameter. I could put my hand through up to the knuckles with little to no resistance. I am a big believer in large exit wounds on large game as I am not keen on having to chase them very far.
 
Nice:).......the .243 and .257 might be good on paper, but bullet weight talks. I can't imagine less than 140 grain projectiles on a moose, and that wants to be a bullet that retains most of it's weight.
 
Nice accuracy with the follow up shot, 3-4'' away from the first one is pretty impressive at 200 yards.
 
Nice Moose - Awesome shooting ! 338 Win mag with the 225 A Frame did a great job - BUT many many other cartridges do the same ! :) RJ

Thanks Remington Jim, you are right, many other cartridges will inflict similar damage. I wanted to demonstrate the actual effects of these particular cartridges as a reference so that guys can make their own informed decisions for future hunts.
 
Back
Top Bottom