375 h&h

[remington jim]

I have Barnes 250 TTSX bullets to load in my H&H anyone shot these bullets ( and THIS bullet ONLY ! PLEASE ) in there H&H and if so what powder - load did you use - I think RL 17 should work well as it does with all the other bullets i have loaded ! s RJ

 

[c-fbmi]

RJ, I think you'd be happier with RL 15 and the 250.............

 

[sharp shooter]

X 2 on the RL15. This thread can be over now. Really, it works that good with that weight.

 

[tbdtp]

I use lots of reloader powder and really like but you guys should give cfe223 a chance in your 375. I am getting just over 2900fps with 250's and great groups. I only decided to try it because there is lots of it around on lgs shelves and I picked up a few pounds to try in a few cals I have that it's burn rate should be good for. My load is 80 grains of cfe223 in nosler brass cci 250 and the 250ttsx. Shot from a 26" bbl Cooper model 56. (Work up to this as it's just a flake or two over book max). It also works very well in powder throwers with its small grain size.

 

[Chinbullco]

H4895 or IMR4895 works good, VihtaVuori N 540 works best.

 

[remington jim]

Ok i have used and have RL15 - I like the idea of the CFE223 too - I think i will try that load first and see how the accuracy and speed is ! s to ALL ! RJ