375 Hawk-Scovill

[conor_90]

Hello very interested in this wildcat.

However I can only find dies for the 375 whelen; which if I am correct is a slightly different shoulder.

So does anyone know where to find the dies and a reamer for this cartridge?

Thanks for your responses.

 

[Potato boy]

Z Hat custom dies and rifles in the US

 

[222Rem]

I"ll be willing to bet RCBS have that die in stock .
Also check with Lee
As for reamer there are not that hard to order from several manufacturers of reamers .
Google is your friend

 

[burnt_servo]

isn't this nothing more than a 9.3x62 necked up to .375 ?

 

[conor_90]

222Rem; amazingly enough I know how to use google. I have yet to find a site that sells the reamers.

burnt_servo- it is based on the 30-06 case

Potato Boy- I have been perusing the z-hat site but cannot find a "for sale" section. I guess an email is in order.

 

[burnt_servo]

222Rem; amazingly enough I know how to use google. I have yet to find a site that sells the reamers.

burnt_servo- it is based on the 30-06 case

Potato Boy- I have been perusing the z-hat site but cannot find a "for sale" section. I guess an email is in order.

06 and 9.3 cases are for all intents and purposes interchangeable

 

[Kevan]

My 375 / 06 AI dies were made by C-H Tool and Die for my late Brother.
Unfortunately I cannot find the source for his chamber reamers.

 

[conor_90]

I am starting to think I might go for the 375 C-T and keep it in the 2.5 family

 

[Kevan]

That's also a good option and if you do maybe touch bases with Supercub on here who had a 375 C-T and / or Johnn Peterson also on CGN who acquired it.

Or you could build a 416 Taylor like mine and never look back... LOL ..

 

[conor_90]

Yeah that was another thought; but I want a backup med bore.

Could get confusing with all the .338 WM brass hanging around though.

Would be nice to have the whole family some day.

 

[Mauser98]

Pacific Tool and Gauge lists Scoville reamers.

http://pacifictoolandgauge.com/37-cal-380-cal-nopix-showcart-/7315-375-06-scovill-reamer.html

 

[burnt_servo]

mason reamers will make a reamer to whatever dimensions you want .... he may even have the exact one you want on file .

 

[conor_90]

Thanks for your responses guys

 

[222Rem]

http://www.jgstools.com/mainarea.html


https://mansonreamers.com/


http://clymertool.com/wildcat/index.html


[url]http://pacifictoolandgauge.com/


If they don't have some thing in stock they will make it for you
even cartridges of your own design

Hope this helps you some










[/URL]

 

[conor_90]

Thank you.


Does anyone know of a Canadian gunsmith who builds these who may have the reamers handy?