375 Ruger Load Help

[NoahDawg]

Just converted to the Darkside....

Put together a load of the following....found the recipe on the net.

84g IMR 4350
Hornady Brass (brand new)
CCI Magnum Primers
260g Accubonds.


Havent fired it yet, but does anyone here have any experience with this combo, and if yes, how did it do?

Thanks!

 

[blargon]

Picking a load off the internet is not a very good idea, especially when it is 1.5gr over listed max. Id start about 77gr and work up.

If you decide to just fire them, at least wait till nobody else is close by.

 

[DIGGER2]

I run 83gr of H4350 with 250grTTSX barnes, but Blargon is right. I would start low and work up and look for pressure signs just for safety sake.