I had a whack of 380 FMJ round nose 95gr that was never gonna be used,....
so would they work for reloading 9mm ?
The answerer is Yes they do.
I measured the 380 and the 9m and were both 355 diameter.
The OAL that worked in my 1911 was 1.050 "plenty of room to crimp"
I had to bump up the charge to 4.6g of IMR 700 to get it to cycle and eject reliably .
The Case was getting pretty full." good thing its a short projectile"
auto comp and blue dot powder, and Aliant E-3 does Not work. You have a Single-Shot fire arm.
so thats it. bang bang .hope this helps some one.
as well..... they would work good for 38special Revolver. you could down load them and have an easy shooting plinker.
so would they work for reloading 9mm ?
The answerer is Yes they do.
I measured the 380 and the 9m and were both 355 diameter.
The OAL that worked in my 1911 was 1.050 "plenty of room to crimp"
I had to bump up the charge to 4.6g of IMR 700 to get it to cycle and eject reliably .
The Case was getting pretty full." good thing its a short projectile"
auto comp and blue dot powder, and Aliant E-3 does Not work. You have a Single-Shot fire arm.
so thats it. bang bang .hope this helps some one.
as well..... they would work good for 38special Revolver. you could down load them and have an easy shooting plinker.
Last edited: