HasegawaYamato
Regular
- Location
- Great Vancouver
Hi lads,
Im not a big fan of rimfires, but I got the gun in a trade with my friend. I dont have a ring for dovetail so I decided to print one, and added a 45 deg side rail for red dot for some tacticool element
Links (for printable model files) and description below the pics, go ahead and print youself one (also need three M3 X 20mm bolts)
If you dont want the side rail you can just use the "top rail lock" model
(sorry for the bad quality of the photoes, the camera glass on my phone is broken )
STL file:
https://drive.google.com/drive/folders/1uuOul5k3BtrT5phO76lhPjesrF-EgonZ?usp=sharing
(In the CZ512 folder)
I asked a friend whos good at rimfires to test it for me, it holds zero no problem
The bolt I used is M3 X 20mm (3 in total), a No4 with appropriate length will be a good imperial substitution
Since I do not have any other gun with dovetail, so Im not sure if it will fit other rifles. If it works on some others, please let me know
For reference, I'm printed it with cheap ABS filament (means very likely mixed with recycled/low quality ABS), so please adjust according to your material and printer.
Temp: 255/108C
Nozzle: 0.4 mm
Layer hight: 0.15 mm
Shell thickness: 1.2 mm
Infill: 40%
Support density: 15%
I printed it vertically to aviod breakage.
Also please print with support on.
I scaled the model up by:
X: 0.2%
Y: 0.2%
Z: 0.4%
Please share some opinions, and feed backs welcomed
If you dont have a printer but want one, and by chance you live near Vancouver, I can print one for you if you r willing to cover my material costs
Im not a big fan of rimfires, but I got the gun in a trade with my friend. I dont have a ring for dovetail so I decided to print one, and added a 45 deg side rail for red dot for some tacticool element
Links (for printable model files) and description below the pics, go ahead and print youself one (also need three M3 X 20mm bolts)
If you dont want the side rail you can just use the "top rail lock" model
(sorry for the bad quality of the photoes, the camera glass on my phone is broken
)
STL file:
https://drive.google.com/drive/folders/1uuOul5k3BtrT5phO76lhPjesrF-EgonZ?usp=sharing
(In the CZ512 folder)
I asked a friend whos good at rimfires to test it for me, it holds zero no problem
The bolt I used is M3 X 20mm (3 in total), a No4 with appropriate length will be a good imperial substitution
Since I do not have any other gun with dovetail, so Im not sure if it will fit other rifles. If it works on some others, please let me know
For reference, I'm printed it with cheap ABS filament (means very likely mixed with recycled/low quality ABS), so please adjust according to your material and printer.
Temp: 255/108C
Nozzle: 0.4 mm
Layer hight: 0.15 mm
Shell thickness: 1.2 mm
Infill: 40%
Support density: 15%
I printed it vertically to aviod breakage.
Also please print with support on.
I scaled the model up by:
X: 0.2%
Y: 0.2%
Z: 0.4%
Please share some opinions, and feed backs welcomed
If you dont have a printer but want one, and by chance you live near Vancouver, I can print one for you if you r willing to cover my material costs
