40x trigger question.

C

Cbob

Regular
Super GunNutz
Rating - 100%
127   0   0
So I set up at the range yesterday. Placed 700p on bench. Set up and notices a silver steel ball on the bench. Thought who would shoot a BB gun here or maybe buckshot. Looked too small for a bb. Thought nothing of it and carried on shooting. About 25 rounds in notices the spring sitting on my gloves on the bench under the action. It all came together as I have spent some time tuning that trigger. The ball was long gone still have the spring and still shot normally without it. Tested trigger pull when I got home and still pulled just under 2lbs. I looked over the diagram and since nothing seemed to change does it need to be there?
 
I understand that. Thanks. Just thought it would act differently when removed. Not sure if I'll order parts or find a different trigger. Is it unsafe to shoot without it?
 
All the way out = the trigger is a light as it will adjust ... you can leave those parts out. However if you want to adjust the trigger heavier, those parts are required.
 
guntech said:
All the way out = the trigger is a light as it will adjust ... you can leave those parts out. However if you want to adjust the trigger heavier, those parts are required.
Click to expand...


Thankyou. That's what I was hoping and thinking from the diagram.
 
40x rifles are an expensive rifle to purchase. Parts are not cheap to buy. I put four 40x repeaters in
McMillan stocks with winchester trigger guards.
 
You must log in or register to reply here.
Back
Top Bottom