45 acp enfields

[tiriaq]

....."Since the barrel shoulder has been machined back the barrel is now scrap, and will never be usable in .303 again."

The shoulder can be carefully machined, and a breeching washer fitted. Makes it very easy to reuse the take-off .303 barrel.
.303 barrels are 1-14 pitch, so it is easy to calculate how much the shoulder must be dressed, and how thick the breeching washer needs to be, in order for the timing to be correct.

 

[teenahlake]

in some ways, it could be even more accurate, by turning back the bbl one thread and recutting a tighter chamber

 

[NavyShooter]

http://www.thehighroad.org/archive/index.php/t-240141.html

 

[teenahlake]

whoever asked about souping up the 45 acp, try these loads in a 308 case cut/reamed to 45 acp specs

http://www.concealco.com/ccu_460row.html

 

[NavyShooter]

My package showed up today....too busy with another enfield project, so it's on the shelf for now.

NS

 

[zuke]

whoever asked about souping up the 45 acp, try these loads in a 308 case cut/reamed to 45 acp specs

http://www.concealco.com/ccu_460row.html

I use 16-17 grain's of Accurrate #7 with LEE 230 gr. tumble lubed bullet's out of my 45 Win Mag

 

[locke it]

Does anybody have more pictures of rifles they've completed? I think I'm in love...

 

[hk33ka1]

Juan are these kits in stock currently? How much $? Thanks.

 

[got to go]

Anything happening with these rifles lately ??? I'd like one chambered in 45 Colt. Single shot would be perfect for my needs. Should be quite simple to do. Someone should have one finished by now. How about some pictures

 

[mark k]

I bought a bunch of .45Super brass in anticipation of my carbines completion. I should be able to drive 230gr XTP's to 1100 pretty easy. Supersonic 185's should be pretty interesting on melons and water jugs.

 

[locke it]

The links for the instructions are no longer working for me.

I need details for the ejector. Can somebody please help me? I need thead sizes for the tap... I think it's 8/32???? I also need location to drill, I'm pretty sure I could wing it but I would like some feed back.

Thanks guys.

 

[locke it]

Anybody?

 

[juanvaldez]

Send me your email and I will send the pdf to you

 

[locke it]

Thanks....but the links no longer work for me. I've tried it on several computers and even had the owner of that site email me the links but they no workie.

 

[juanvaldez]

Anybody?

Got some pics? You get your stuff from me?

 

[juanvaldez]

Thanks....but the links no longer work for me. I've tried it on several computers and even had the owner of that site email me the links but they no workie.

I have a pdf file...not a link

 

[locke it]

Got some pics? You get your stuff from me?

I did. I'll post pictures once I get the friggin ejector in...lol. I'm stoked on this build though and it's so cool.

 

[Beater]

are you going to make up any more kits? im still lookin for one if so

 

[juanvaldez]

are you going to make up any more kits? im still lookin for one if so

Sure...still have the invoice?

 

[mg4201]

Any chance of getting just the barrel nuts?