.460 S&W dies

[RT]

Can .460 S&W dies also be used to reload .454 casull and .45 lc.

 

[notsorichguy]

Not enough taper.

I have tried.....

 

[Boomer686]

I have the redding dies for my Dillon 550B. No issue at all you just need to adjust them for the shorter brass lengths.

 

[Boomer686]

Not enough taper.

I have tried.....

What dies did you use??? I have no issue with my Redding dies in my 550B.

 

[notsorichguy]

RCBS, carbide.

I now have 45LC and 460 dies, never tried 454....

 

[mmcintyre1220]

I have lee dies, I cannot load 454 or 45LC as the seating stem runs out of length to seat the bullet to the correct depth. I purchased a Lee 45LC 4 die set for 45LC and 454. The factory crimp die included works with 45lc,454 and 460.

 

[RT]

Ok, so if I go buy dies exactly what set will do .460,.454,&.45lc

 

[mmcintyre1220]

Ok, so if I go buy dies exactly what set will do .460,.454,&.45lc

I do not believe any single one die will reload the three. you will need to buy a set in 460 and 45lc

 

[Pencilneck]

You will have to get the Casull set and the 460 set plus the factory roll crimp die for the casulls which goes for all 3 caliber (LEE is the cheapest and works)