Levelling-off the playing-field against the 10/22's, huh?....
But valid point, of course!....
500 Round Mag for 10/22 (...yes that's 500!)
- Thread starter Wham-O
- Start date
Levelling-off the playing-field against the 10/22's, huh?....
But valid point, of course!....
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
I was looking for a cheap .22 rifle to purchase so my daughter and I could go to the range, looking at the savage 64 and others like it, I came to the suprise that the factory mags (10rd) were all that was available, the 138 drum does have a changeable magazine adapter and I do plan to have an adapter for EVERY RIMFIRE that takes a removable magazine! 
so far the adapters are of course the 10/22 following the masses, as well as savage,cooey,lakefield,marlin and remington we will be adding more in due time, focus is on final production pieces of the drum it self,I can't say this enough 
built in CANADA not china!!! any CGN input would be more than welcome! thanks Ryan
so far the adapters are of course the 10/22 following the masses, as well as savage,cooey,lakefield,marlin and remington we will be adding more in due time, focus is on final production pieces of the drum it self,I can't say this enough built in CANADA not china!!! any CGN input would be more than welcome! thanks Ryan
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
Black, Olive Drab, and tan, other colors will be special order.
blacksmithden
CGN Ultra frequent flyer
We're coming up on July pretty quickly. Is this little project still on track ?
- Location
- London, Ontario
The video is not working
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
video http://www.youtube.com/watch?v=n6vExVhvwPo with some bad ammo 
some of the parts are starting to be manufactured this week, some have been postponed by a couple weeks, this may push the date back a bit but not to long,
some of the parts are starting to be manufactured this week, some have been postponed by a couple weeks, this may push the date back a bit but not to long,
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
I may have to start another thread for the 138 round drum magazine, my friends are questioning me about this (500rnd mag???) it is not me!
blacksmithden
CGN Ultra frequent flyer
I know you won't have a final price until all the parts are done, and the bugs are worked out, but do you have a ballpark estimate ? I'm really interested in one of these.....especially since I'm in Edmonton too.
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
I know you won't have a final price until all the parts are done, and the bugs are worked out, but do you have a ballpark estimate ? I'm really interested in one of these.....especially since I'm in Edmonton too.
to start the cost will be around $150-200 including a 10/22 adapter, additional adapters will be around $25,With greater volume the cost should be around the $100 mark, with the adapters at about $15,
These being CANADIAN MADE! is only really effecting initial cost with low volume,
KEEP IT CANADIAN!!
Why is it 138 rounds and not a nice even 150, 138 seems odd.
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
ruger 10/22, savage, lakefield, cooey, marlin, right now, and I am working on others as we speak, any suggestions??
and I am working on others as we speak, any suggestions??ruger 10/22, savage, lakefield, cooey, marlin, right now,
Remington 597, Black Dog Machine (for all the guys using AR-15 conversion kits)...
... Buckmark cabine?
