53grTSX with IMR3031 loads?

[leveractionjunkie]

Does anybody know of a source for load data using 53grTSX bullets in the .223 with IMR3031? I have a couple loads worked up to try that I got from the barnes manual but they don't list IMR3031. I am sure the loads from the manual will shoot fine but I have 11lbs of 3031 and would like to see if it will accurately shoot these bullets in my gun.

 

[leveractionjunkie]

Anyone?

 

[SuperCub]

Try Reloaders Nest or Steves Pages.



.

 

[gpracer]

I have used a lot of 3031 over the years with the 223, 24.2 grains is usually my go to load with the 53 grain Sierra, it's pretty close to the max though, I'm sure you could start at 22 grains and safely work up a load that shoots well in your rifle. The only drawback is that the powder does not meter well so a powder trickle of some sort is pretty necessary to ensure consistent loads.

 

[leveractionjunkie]

I have used a lot of 3031 over the years with the 223, 24.2 grains is usually my go to load with the 53 grain Sierra, it's pretty close to the max though, I'm sure you could start at 22 grains and safely work up a load that shoots well in your rifle. The only drawback is that the powder does not meter well so a powder trickle of some sort is pretty necessary to ensure consistent loads.

I have an RCBS Chargemaster so I am not worried about powder metering through the measure. My main concern is, can I achieve similar velocities as the other loads in the book with IMR 3031 with safe pressure? That way as bullets cross the Chronograph I can tell when I'm approaching maximum.