6.5 Creedmoor
- Thread starter big fifty
- Start date
Pathfinder
CGN Ultra frequent flyer
- Location
- Northeast Ontario
No sense reinventing the wheel....
from link below.
The recipe for the 140-grain A-MAX load is 41.7 grains of H4350 with a Federal 210 Match primer loaded to 2.820 inches; my reloads shot to within 10 fps of the factory-loaded ammunition, which is identical for practical purposes. The load for the 120-grain A-MAX is 43.5 grains of H4350 with the same primer, but loaded to 2.720 inches. My reloads shot to within about 10 fps of the factory ammo
http://demigodllc.com/articles/6.5-creedmoor-260-done-right/?p=3
from link below.
The recipe for the 140-grain A-MAX load is 41.7 grains of H4350 with a Federal 210 Match primer loaded to 2.820 inches; my reloads shot to within 10 fps of the factory-loaded ammunition, which is identical for practical purposes. The load for the 120-grain A-MAX is 43.5 grains of H4350 with the same primer, but loaded to 2.720 inches. My reloads shot to within about 10 fps of the factory ammo
http://demigodllc.com/articles/6.5-creedmoor-260-done-right/?p=3
Pathfinder
CGN Ultra frequent flyer
- Location
- Northeast Ontario
I thought it was in the 308 win family ? Is it not easier to reform 7-08 or 243 cases ?
