6.5 x 55 - Headspace field gauge (M38 Swedish Mauser)

thirdeye462

Member
Rating - 0%
0   0   0
Location
Toronto, ON.
Hi all,

Checking in to see whether anyone here in the hive mind might have a 6.5 x 55 headspace field gauge they'd like to part with before I purchase a new one off of Manson or Forster. I just got a purpose-built M38 Husky (1942) arsenal refurb (bolt matches receiver). Gonna get the whole thing inspected all the same, but thought having a field gauge would be nice.

Searched the EE, but no go (pun intended).

Thanks!
 
I had read that Regimental gauges as used at Carl Gustaf Armoury were longer than SAAMI set standards for - so much so that a Swede GO gauge was LONGER than a SAAMI FIELD gauge. As a result, a "new" from CG Arsenal rifle would "fail" a SAAMI gauge headspace test. There might be merit though, if using SAAMI compliant ammo (virtually any North American maker), that one should have a SAAMI compliant chamber in the rifle. I had read that many Swede rifles, when imported into USA, were "fixed" by American gunsmiths, because they "failed" a headspace check.

I do not know what gauges were used by Husqvarana - but SAAMI is an American entity, so it would surprise me if Husqvarna used those standards for production to be used in Sweden - since Sweden tended to make their own standards - and had been using and making 6.5x55 for several decades BEFORE SAAMI even existed.

Sweden apparently did not adopt C.I.P. standards, but their own are very similar to C.I.P.'s.

It would also surprize me if the military armourers kept two sets of headspace gauges - one set for CG made stuff and another set for Husqvarna made stuff. I read that both the conversions done at CG from M96 rifles and the production from Husqvarna were all referred to as "M38" rifles, by the Swede military.
 
Hi all,

Checking in to see whether anyone here in the hive mind might have a 6.5 x 55 headspace field gauge they'd like to part with before I purchase a new one off of Manson or Forster. I just got a purpose-built M38 Husky (1942) arsenal refurb (bolt matches receiver). Gonna get the whole thing inspected all the same, but thought having a field gauge would be nice.

Searched the EE, but no go (pun intended).

Thanks!
If you find a good deal on a set (actually, I’m only interested in field) post it here. I mean, at the right price, I’d buy the whole set but for collectors determining if a chamber is safe for not, field is the only one that’s useful.
 
Hi all,

Checking in to see whether anyone here in the hive mind might have a 6.5 x 55 headspace field gauge they'd like to part with before I purchase a new one off of Manson or Forster. I just got a purpose-built M38 Husky (1942) arsenal refurb (bolt matches receiver). Gonna get the whole thing inspected all the same, but thought having a field gauge would be nice.

Searched the EE, but no go (pun intended).

Thanks!
I would rather have a GO GAUGE. One piece of masking tape added makes it a no go gauge. And that's all you need.
 
Checked a lot of 6.5x55 Swedish rifles when I had my shop. Never found one that wouldn't close on a SAAMI No Go.
I don't think there is much of a relationship between SAAMI and Swedish military standards.

Given a Husqvarna rifle with matching bolt, I would not bother buying a Field gauge. The likelihood of it being unsafe is negligible.
 
I had read that Regimental gauges as used at Carl Gustaf Armoury were longer than SAAMI set standards for - so much so that a Swede GO gauge was LONGER than a SAAMI FIELD gauge. As a result, a "new" from CG Arsenal rifle would "fail" a SAAMI gauge headspace test. There might be merit though, if using SAAMI compliant ammo (virtually any North American maker), that one should have a SAAMI compliant chamber in the rifle. I had read that many Swede rifles, when imported into USA, were "fixed" by American gunsmiths, because they "failed" a headspace check.

I do not know what gauges were used by Husqvarana - but SAAMI is an American entity, so it would surprise me if Husqvarna used those standards for production to be used in Sweden - since Sweden tended to make their own standards - and had been using and making 6.5x55 for several decades BEFORE SAAMI even existed.

Sweden apparently did not adopt C.I.P. standards, but their own are very similar to C.I.P.'s.

It would also surprize me if the military armourers kept two sets of headspace gauges - one set for CG made stuff and another set for Husqvarna made stuff. I read that both the conversions done at CG from M96 rifles and the production from Husqvarna were all referred to as "M38" rifles, by the Swede military.
This is really great info, Postashminer. Thanks for this.

"Sweden apparently did not adopt C.I.P. standards, but their own are very similar to C.I.P.'s." I was wondering about this. As I was looking into things, I was trying to figure out the SAAMI vs CIP question with respect to these Mausers, and it was really unclear to me whether gauges using either of these standards (outside the regimental gauges) are adequate enough or appropriate to tell you whether headspace is out of spec, especially after reading about how the chambers were cut generously on these things.

I did notice that Pacific Tool & Gauge carries field and "CIP max" gauges. It got me thinking about which is the most appropriate: https://www.pacifictoolandgauge.com/65-x-55-Swedish-SAAMICIP-Headspace-Gauges_p_114375.html


Can anyone point me to the 24-hour Carl Gustav regimental gauge store? :ROFLMAO:
 
Back
Top Bottom