You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
6.5x58mm
- Thread starter freire
- Start date
Donnelly pg 449 says,
make from .270 Win.
Anneal neck, run into full lenth die with expander removed.
Trim to 2.272" and chamfer. F/L size. Ream neck if seated bullet expands neck beyond .293" in dia.
Bullet 0.264" 160 gr.
powder 43gr. 4350
make from .270 Win.
Anneal neck, run into full lenth die with expander removed.
Trim to 2.272" and chamfer. F/L size. Ream neck if seated bullet expands neck beyond .293" in dia.
Bullet 0.264" 160 gr.
powder 43gr. 4350
I had one of these rifles some years ago and the only loaded ammunition I was able to get my hands on were 10 round packs of Kynoch manufacture from a cartridge collector J.J.Rondeau,long since deceased and one great guy to deal with.This was essentially collector ammo and was really too desirable and scarce to shoot.I ended up ordering a set of RCBS dies from Huntingtons in the states and formed my own brass from 270/30-06,really quite simple to do,especially with a case trim die.Fellows, do any of you know where i can get 6.5X58mm for the Vergueiro rifle?
Thanks...Victor.
