6 Sporting Arms

1 - Auto 5 12 ga
2 - 22 K Hornet Brno 465
3 - 30 - 30 - Model 94 SRC with Peep
4 - 7 X 57 Custom FN Mauser
5 - 9.3 x 62 Custom Husky
6 - 375 H&H Custom Sako (FN) Mauser
6 - 375 H&H
 
1- Ruger 10/22 .22
2- Remington LVSF .22-250 Rem
3- Kimber Montana .260 Rem
4- Winchester SS M70 .300WSM
5- Ruger Alaskan .375 Ruger
6- Remington 870 (18.5" defender barrel, 21 turkey barrel and 26" duck barrel)
 
1) SMLE with interchangeable barrels in:
.22 S,L, LR
.256 Swift Flanged (.256 Mannlicher / 6.5x53R)
.303 Flanged N.E. 2 1/4"
.400/360 Flanged N.E. 2 1/4" (essentially a 9.3x57 using 303 brass)
.42 Flanged N.E. 2 1/4" (like a .444 Marlin but using a 375 grain bullet)
.50 muzzleloader

2) 12 bore SxS, Jas. Purdey or Holland & Holland SLNE, DT, SG, with 2 sets of barrels (27" [choked cylinder & 1/4] & 30" [choked modified & full])

POSSIBLE SUBSTITUTION: a .470 N.E. SxS with another 2 sets of barrels in .303 & 12 bore), but then it should NOT be a SG.

3) Husqvarna Model 46 with interchangeable barrels in:
.256 Gibbs (6.5x55),
.355 Mauser (9.3x57)

4) Husqvarna Model 146 with interchangeable barrels in
.275 Rimless N.E. (7x57);
.30 U.S. Model of 1906;
8x57 IS;
.330 Rimless N.E. 2 1/2" (.338-06 A-Square);
.350 Rimless N.E. 2 1/2" (.35 Whelen);
.366 Mauser (9.3x62);
.458 Winchester (assuming spare bolt & detachable single stack box magazine)

5) Savage / Stevens, with interchangeable barrels (& spare bolt head) in:
.223 Remington
6.5 Creedmore
.308 Winchester

6) .30 W.C.F. built on Winchester Model 94 carbine

There. Did it in 6!!!

;-)
 
jamesharrison said:
1) SMLE with interchangeable barrels in:
.22 S,L, LR
.256 Swift Flanged (.256 Mannlicher / 6.5x53R)
.303 Flanged N.E. 2 1/4"
.400/360 Flanged N.E. 2 1/4" (essentially a 9.3x57 using 303 brass)
.42 Flanged N.E. 2 1/4" (like a .444 Marlin but using a 375 grain bullet)
.50 muzzleloader

2) 12 bore SxS, Jas. Purdey or Holland & Holland SLNE, DT, SG, with 2 sets of barrels (27" [choked cylinder & 1/4] & 30" [choked modified & full])

POSSIBLE SUBSTITUTION: a .470 N.E. SxS with another 2 sets of barrels in .303 & 12 bore), but then it should NOT be a SG.

3) Husqvarna Model 46 with interchangeable barrels in:
.256 Gibbs (6.5x55),
.355 Mauser (9.3x57)

4) Husqvarna Model 146 with interchangeable barrels in
.275 Rimless N.E. (7x57);
.30 U.S. Model of 1906;
8x57 IS;
.330 Rimless N.E. 2 1/2" (.338-06 A-Square);
.350 Rimless N.E. 2 1/2" (.35 Whelen);
.366 Mauser (9.3x62);
.458 Winchester (assuming spare bolt & detachable single stack box magazine)

5) Savage / Stevens, with interchangeable barrels (& spare bolt head) in:
.223 Remington
6.5 Creedmore
.308 Winchester

6) .30 W.C.F. built on Winchester Model 94 carbine

There. Did it in 6!!!

;-)
Click to expand...

Ur trying too hard to sit at the kool lunch table... ;)
 
Anschutz 1710 DKL .22 LR

Beretta 686 20 ga O/U
Remington 870 12 gauge

Kimber Pro Varmint .223 Remington
Winchester 70 Featherweight SS .30-06 or .270 Win: likely .270 as the .375 does heavy better, and the .270 will work in any country that prohibits hunting with military cartridges.
Winchester 70 Alaskan SS .375 H&H magnum

Six isn't enough!
 
Last edited:
22LR bolt
non-refurbished, and unf**ked with SKS
6.5x55 bolt
7x57 bolt
30-06 bolt
12ga Rem 870 + a few extra different barrels (just make sure it works! :))


#7 for good luck:
a good antique status pistol ('cause it's better than waving your #### at a bear)
 
Drilling 8x57 , 12 gauge
Mauser 98, 9.3x62
Lee speed, 303
Savage lever, .308
Marlin 45/70
Cz, 22 lr

Maybe substitue the 45/70 lever for a mannlicher in .458 and maybe include a .22 insert for the drilling.
Other then that "my dream team"
 
You must log in or register to reply here.
Back
Top Bottom