7.62X25 Tokerev load data?

[vitaminb]

Hey has anyone got any data or a link to where i can find some loads for this?

 

[floriosean1]

i load 85 grain plated rounds over 6.0 grains of unique, my manual says that 6.2 is the max and 5.0 is the minimum

 

[TangoKilo]

Which brand of Plated bullets are you shooting??

Any idea what the velocity is??

 

[Henry Nierychlo]

PM zippy_the_wonder_chimp He has some good loads for Tok's
Regards, Henry

 

[Mobular]

I'm using 5gr of Winchester 231 under a 110gr Berry's M1 CMJRN, all of this is loaded into either Starline brass or modified .223 brass. See the process here:
http://www.canadiangunnutz.com/forum/showthread.php?t=501415&highlight=reel&page=4

 

[hk33ka1]

Lyman 49th and Cast 4th have info. What powders and bullets do you want to load?

 

[zippy_the_wonder_chimp]

Tok loads

So far it's mainly been Unique powder in my '52 TT-33:
----------------------------------------------------
85gr Hornady SPRN (not the easiest to seat) 5.6 - 7.0gr max

110 gr Berry's plated .308 (M1 Carbine bullets) 5.0 - 6.0gr max

Tried SR4756 also- add 5% or so to the Unique loads.

Always start safe and load up in small increments.
Mark the powder charge on your brass and compare
your primers once fired for signs of pressure.

Both bullet types were from Henry N of Budget Shooter Supply fame.
Hope to do more Tok load testing in the future.
Have alot of projects in mind and it's easy to get distracted
from any one thing.

 

[floriosean1]

i use the hornady jacketed soft point ones, but after noticing that the bullets were tumbling i slugged my bore to find a .3115 diameter, so now i use hornadys 32 cal 85 grain xtp's with a 312. diameter and it shoots well