7.62x51 Nato

To bad for the guys that shoot at ranges that banned Bimetal rounds

What is banned on most ranges is steel core, I wqas not aware of bans on bi metal projectiles.... A lot of military and civilian rounds are loaded with bi metal as you call it, mild steel jacket with bronze, copper or nickel plating

John
 
What is banned on most ranges is steel core, I wqas not aware of bans on bi metal projectiles.... A lot of military and civilian rounds are loaded with bi metal as you call it, mild steel jacket with bronze, copper or nickel plating

John

Certain range passe the magnet test to your ammo, if the magnet stick it's a no no, some will be penalyzed that is for sure... Ammo is top class, and it shoot awsome... JP.
 
Certain range passe the magnet test to your ammo, if the magnet stick it's a no no, some will be penalyzed that is for sure

Do you know what their logic is? If it's an indoor range then banning steel core might be sensible to prevent abuse to the backstop.
My range is outdoor and doesn't ban with a magnet rule. Although I know all the cheap surplus 7.62x39 chews up the backstop they do use. It's about to get the HT treatment from me ;-)
 
Do you know what their logic is? If it's an indoor range then banning steel core might be sensible to prevent abuse to the backstop.

I was member at an indoor range in Calgary for two years. The first year steel jacket was allowed and then it was banned after they repaired the backstop wall & increased membership fees.... i stopped going there and use outdoor ranges now; longer drive, but better environment.
 
Myself i passed the opportunity of getting a second membership in another indoor range du to those magnet rules (St-Pierre)... JP.
 
Last edited:
Do you know what their logic is? If it's an indoor range then banning steel core might be sensible to prevent abuse to the backstop.
My range is outdoor and doesn't ban with a magnet rule. Although I know all the cheap surplus 7.62x39 chews up the backstop they do use. It's about to get the HT treatment from me ;-)

Steel core is "apparently" more prone to spark off rocks and start forest fires (probably became an issue in very dry, fire-prone southern states), they can "supposedly" destroy more backstops, etc. I've read that some ranges will allow you to cut a bullet open to show it is only steel-jacketed and not cored, but others will simply use the magnet test as a crude pass/fail. I personally have never had the issue, and wouldn't hesitate to buy and shoot the stuff if the price was right.
 
What is banned on most ranges is steel core, I wqas not aware of bans on bi metal projectiles.... A lot of military and civilian rounds are loaded with bi metal as you call it, mild steel jacket with bronze, copper or nickel plating

John

As stated by others if a magnet sticks to the bullet you are SOL .
Not my rules & not my range
 
Yeah, the Shooting Edge Calgary doesn't allow any steel jacketed or steel cored ammo as far as I am aware. I haven't asked them why though.
And my case came in, it all looks good. And I'm ok with the bi-metal jacket.
 
Many indoor ranges don't want steel core ammo on the firing line, yes it does damage the backstop plates but the biggest hazard is from ricochets, the steel core does not deform like lead upon impact and often comes back at the firing line....
One would hope that ranges/clubs would do their homework on the various types of ammo out there or at least question the importer ?
John
 
It should only stick to the bullet not the entire round.... the projectile is bi metal, not steel core.... Copper over mild steel....
John
Confused here John... In your Nato spec sheet it is called Copper jacket, lead core . Do we have a variety of bullets???
 
First Calgary group buy has arrived and I picked it up today.
All 1975 manufacture for us.
Arrived one day earlier than said by DAY & ROSS.
PM'ed every member of the group to inform them.



20150601_124648_zpsg3yf8ic0.jpg
[/URL]
 
Last edited:
Back
Top Bottom