7PRC

Jguichon01

Jguichon01

Member
Rating - 0%
0   0   0
Looking for any insights on reloading 7PRC. Nosler Partition is my go to bullet coming from the 30-06 world. Looking to load the 175gr partition into my 7PRC, I know it's not "designed" for that kind of bullet. But wouldn't mind getting some first hand feedback on results, I've got some coming to load up and try.
Thanks for any knowledge!
 
Last edited:
Jguichon01 said:
Looking for any insights on reloading 7PRC. Nosler Partition is my go to bullet coming from the 30-06 world. Looking to load the 175gr partition into my 7PRC, I know it's not "designed" for that kind of bullet. But wouldn't mind getting some first hand feedback on results, I've got some coming to load up and try.
Thanks for any knowledge!
Click to expand...
It's a 7mm. It will work fine, and the 175 gr Partition is a great hunting bullet. I've used it in 7 Rem Mag, Wby Mag, 7x61 S&H, 7x64, 280 Rem, the AI version. Probably some others I'm forgetting. - dan
 
dan belisle said:
It's a 7mm. It will work fine, and the 175 gr Partition is a great hunting bullet. I've used it in 7 Rem Mag, Wby Mag, 7x61 S&H, 7x64, 280 Rem, the AI version. Probably some others I'm forgetting. - dan
Click to expand...
I guess I'll give it a go. Will report back with results
 
With RL26 being ferry dust and given that I never tried Ramshot grand I did work up a couple very good loads in my 7 PRC and 175gr bullets ( not the NP ) but the ELDX, I tried Retumbo and RL25 neither one gave acceptable results, however H4831 and H1000 worked very good, they gave 2984 and 2988 FPS with 3 shot groups that were sub .300. both loads were near max in my gun and produced single digit SD and ES start low and work your way up if trying these loads.
 

Attachments

  • 7 PRC 175 ELDX - H1000.jpg
    7 PRC 175 ELDX - H1000.jpg
    69.9 KB · Views: 11
  • 7 PRC 175 ELDX - H4831.jpg
    7 PRC 175 ELDX - H4831.jpg
    66.9 KB · Views: 11
You must log in or register to reply here.
Back
Top Bottom