7wsm loads anyone

I

ivo

CGN frequent flyer
Rating - 100%
99   0   0
Location
Calgary, AB
As usual, I tried the search but it sucks so I have to start a thread about something I'm sure has been discussed before.
I have a PGW Coyote in 7wsm on the way and need some recipies. I won't be able to seat the bullets real long(because its mag fed) so I'm thinking 168 Bergers, maybe 162 Amaxs... but if you have recipies for 175 MKs or 180 Bergers fire away, you never know what will work.
Thanks in advance.
Ivo
 
Check manual and drop the load by 10% and start there,my .2 cent
The yote will explode with 168gr use 139 or 140gr and some H4831,55.0gr to 65.0 and OAL is 2.830 with tipped off balistics tips ( HORNADY )
 
Last edited:
i use h4350 and hornady 139's in sst's then for hunting i just switch to interbonds of same grain and have had awesome accuracy and works awesome on game. lovin my 7wsm!!!is my first year playin with it and if it keeps performing like it is ,it has a awesome chance of becoming my go to rifle.
 
I use 60.5 grains of H414 under 140 grain SSTs and Gamekings, and it works great in my Savage. For hunting, I generally switch to a partition or accubond, otherwise the impact velocity causes the less-well-constructed bullets to disintegrate. So far, I've taken deer and elk with this load, and none of the animals has complained.

Erik.
 
140gr nosler Bt h4831sc max laod 3150fps very very accurate load. 140gr Partitions max load of Magpro powder 3290fps use mag primers in both loads
 
Thanks guys. I never even considered 140gr bullets but will give them a try once the rifle gets here, sounds like they work for most of you.

Ivo
 
You must log in or register to reply here.
Back
Top Bottom