858 feeding problem

[bilkathegerman]

Hi everyone, just bought a new 858, most of the time the last round won't feed into the chamber but will stay stuck (tip of the bullet inside the chamber but other end still in the mag) I thought that would be a mag problem but did the same thing with 2 other mags. I thought the spring might be to weak but in all the mags??? I m a newbie and would appreciate your help!

 

[j136]

happened to mine sent it back under warranty and since returned I have had no problems with it.

 

[RaTa]

Yea I would send it back, could be a variety of issues that are hard to diagnose without seeing it.

 

[bilkathegerman]

Thanks a lot, will do!

 

[Curtton]

Hi everyone, just bought a new 858, most of the time the last round won't feed into the chamber but will stay stuck (tip of the bullet inside the chamber but other end still in the mag) I thought that would be a mag problem but did the same thing with 2 other mags. I thought the spring might be to weak but in all the mags??? I m a newbie and would appreciate your help!

what kind of ammo are you using?

 

[Satain]

Also is it a CZ 858 or a VZ 58 or a CHZ 2003?

 

[bilkathegerman]

It s a CZ 858, was using prvi partizan soft points.

 

[Curtton]

It s a CZ 858, was using prvi partizan soft points.

common problem with brass casing, you wont have problem with steel casing .

http://www.canadiangunnutz.com/forum/showthread.php?p=4164508&highlight=polish#post4164508

 

[Satain]

You will have to look for Igman. Will work with no problem's.

 

[nikoinwinnipeg]

de burr! and your problems will be solved mine had this issue.

 

[RaTa]

Yea there should be no reason the rifles don't feed the softpoints. If there is a problem with the softpoints then I would suggest the problem is with the rifle.

If your rifle is brand new then send it back to have whatever issue is dealt with. Why bother fixing it when the importer will and carry the liability.