858 Full Strip

[blueskies]

I want to do a full detail strip of my CZ 858 including the trigger group and I was wondering if there is a guide or even a video on how to do this?

 

[Satain]

Good question. I think no as most youtube vid's on show how to field strip it. If you want to go further than that I could help ya out in the 604, just PM me if you get stuck and I'll walk you over on the phone.
Here are some vid's to help ya out;
[youtube]cBa5yoWlGBg[/youtube]
[youtube]Q-vSb4xpQBM[/youtube]
Hope this helps

 

[Curtton]

I want to do a full detail strip of my CZ 858 including the trigger group and I was wondering if there is a guide or even a video on how to do this?

there is a locking plate on the inside of the reciever that needs to be tilted to remove the axis pins . there is a a small spring in the trigger that require a needle nose plyers to place it in position, other than that its pretty simple.

the second vid above has a nice technique on how to disassemble a bolt.

myself i use a vise.

 

[blueskies]

Thank you for the the offer to help over the phone. Fortunately I managed to figure it out with the video link you provided.

Good question. I think no as most youtube vid's on show how to field strip it. If you want to go further than that I could help ya out in the 604, just PM me if you get stuck and I'll walk you over on the phone.

 

[blueskies]

Thanks for the tip.

there is a locking plate on the inside of the reciever that needs to be tilted to remove the axis pins . there is a a small spring in the trigger that require a needle nose plyers to place it in position, other than that its pretty simple.

the second vid above has a nice technique on how to disassemble a bolt.

myself i use a vise.

 

[blueskies]

I clean my rifle after every use however I have not stripped the bolt before. I was surprised to see how much gunk was in there. I would recommend 858 owners consider stripping and cleaning the bolt to ensure reliable functioning.