9.3 lower velocity bracket

[WhelanLad]

I had a tikka hunter in 9.3x62 and felt it was pretty comfy, I was just shooting fairly lightly loaded PPU (Prvi partizan) factory 286 ammo and had a bit of a heavier scope (30mm tube, 2.5-10x50mm nikon prostaff 7) and it wasn't bad, I actually really liked that rifle, you may want to try upgrading the recoil pad which is a common swap for the hockey puck rubber they put on the back of the tikka's from the factory.

If you have a T3 lite it may make a bit of a difference as the hunter as the heavier barrel. I believe Jeff270 on here is shooting the thing now.

I found myself a left handed steyr model M fullstock, my "unicorn" and didn't feel I needed two 9.3's so it went to someone else.

Hey Cody,
yep it wears a Limbsaver recoil pad, does good.
Like you say with 286gr PPU stuff, the 9.3s are Great to shoot, this was what lead me down this path
stoked up with powder she sings.
its a Synthetic Blued model, should be called a 'T3 Lite' still!

 

[Camp Cook]

I shoot a 21" barreled T/C Contender carbine in 375JDJ I load 260gr Accubonds at 2300fps they are designed to expand down to 1800fps due to the high BC's these loads are still doing 1800fps at 300 yards.

I have a Leupold 2.5-8x36mm B&C reticle scope mounted have it zeroed 1" high at 100 yards the first B&C line down hits 1" high at 200 yards and the second B&C line down is dead on at 300 yards I would not hesitate to shoot any animal in North America out to 300 yards with this combo.

I suggest using 250gr Accubonds in the 9.3x62 will make it a very versatile do every combo.