9.3x62 Lapua Brass

The 9.3x62 Mauser Lapua brass is definitely 9.3 x 62 mauser dimension, and not restamped 30-06.
My Lapua brass measures about 0.002" bigger on the rim and base of the virgin brass compared to a 30-06 brass.
 
The lapua 9.3x62 brass I had was 100% restamped 30-06. I had new lapua 30-06 brass to compare against for another project. Maybe different tooling out there or they’ve changed it since or who knows.
 
ww270win said:
The 9.3x62 Mauser Lapua brass is definitely 9.3 x 62 mauser dimension, and not restamped 30-06.
My Lapua brass measures about 0.002" bigger on the rim and base of the virgin brass compared to a 30-06 brass.
Click to expand...
how long ago did you buy the Lapua 9.3x62 that is stamped correctly and is the correct measurement
 
Jon87 said:
Here’s the original thread that prompted this discussion if anyone’s curious

https://www.canadiangunnutz.com/forum/threads/9-3x62-case-web-expansion.2444202/
Click to expand...
that was a very good read , and i now fully understand ,

i got some brand new Norma in the mail to me , i'm thinking after reading that whole tread, after my first firing, i'm just going to next size only down to the shoulder, brass will last me my lifetime ,

should i anneal them all again after the first firing , even if only neck sizing , i would think should be good for at least a couple firings before needing to anneal again


any opinions or thoughts on this
 
You must log in or register to reply here.
Back
Top Bottom