9.3x62 loads or recipes or for the 366 Wagner

[medvedqc]

we had the discussion yesterday with the 9.3x62 man himself and i decided to created the thread.

what are you recipes and loads for your 9.3x62 and 366 Wagner?

thanks a lot for sharing.

Phil

 

[Hitzy]

57gr Varget, 286gr PRVI, custom '98 with Shaw 26" barrel nets me this.



Same load but with 270gr speer, HVA 98 originally in 9.3x57 but reamed to 9.3x62 by Andy prints like this at 100m

 

[freire]

59.5gr of Varget, 286gr PRVI, excellent accuracy.

 

[huntingfamily]

CZ550 FS, 20.5" barrel:

59.0 H4895, 250gr nosler accubond, 2600 fps

61.5 Varget, 270gr speer sp, 2461 fps

Both very accurate in this rifle.

 

[9.3mauser]

RL-15. 59-60 gr. for the 285's, 62 gr. for the 250's.

 

[Andy]

285 gr PRVI, 3.300" OAL

1. RL17 - 67.0 grs (compressed) - 2600 fps
2. H4350 - 67.0 grs (compressed) - 2500 fps
3. Superformance - 71.0 grs (compressed) - 2500 fps

Yet to try - RL16.

 

[jethunter]

IMR4895 60gr - 285gr PRVI = 2500 fps

 

[mbogo3]

58gr RE#15 /286gr

 

[BCBRAD]

Ram Shot Big Game really woke my 9.3 up!

 

[JR Hartman]

subbing, as I will soon be reloading for one.

20" Zastava to be exact

 

[dgradinaru]

57gr of h4895 with 285gr ppu @2440fps out of 22inch zastava. Excellent accuracy under 1 inch. Load was recommend by Ted himself.

 

[9.3 Hunter]

58gr RE#15 /286gr

58.3 for mine.......

 

[Why not?]

This is an old thread, but here's a couple of mild loads that a friend recently chronographed.

285 gr PRVI, 3.300" OAL, magnum primers, reformed W-W 30-06 brass.

51 gr IMR4895 gave 2108 fps
56 gr IMR4895 gave 2279 fps

This in a quite light rechambered 9.3X57 Husqvarna Model 46 with original 60 cm (23 5/8") barrel.

Ted

 

[JR Hartman]

could some of you post more on OAL please?

285grn PRVI seems to be a popular bullet, and I have it as well.

I see two at 3.300 so far

 

[freire]

could some of you post more on OAL please?

285grn PRVI seems to be a popular bullet, and I have it as well.

I see two at 3.300 so far

I seat mine at 3.300" as well.

 

[Why not?]

I have several '62s, and have seated each load to just shy of the full length of the magazine box of the particular rifle. Have never had a problem with bullet being seated out too far. Every chamber has a long enough throat to accept loads to that length.

Settled on the shortest loading for all three. These are hunting rifles, and not trying to squeeze the last twenty thou out of a group.

Ted

 

[Boomer]

I have several '62s, and have seated each load to just shy of the full length of the magazine box of the particular rifle. Have never had a problem with bullet being seated out too far. Every chamber has a long enough throat to accept loads to that length.

Settled on the shortest loading for all three. These are hunting rifles, and not trying to squeeze the last twenty thou out of a group.

Ted

Hey, I meant to ask you the other night, did you have success with the 760 Remington 9.3X62 project, and if so, how did it shoot?

 

[Why not?]

Hey, I meant to ask you the other night, did you have success with the 760 Remington 9.3X62 project, and if so, how did it shoot?

I am between flights in Vancouver, so this will be quick. Have all the components. Just need to put them all together.

Ted

 

[Ganderite]

Speer 270 gr

55 H4895 2300

66 H4350 2400

60 760 2550

 

[BigUglyMan]

286gr Norma RN
63gr RL15
CCI 250 primer
Lapua brass

This gives 2350 fps in my Husky M98. My testing shows that my chamber is a hair oversize which is why I had to work up. But be advised that this load is over book maximum. Start low and work up. DO NOT USE THIS LOAD WITHOUT REDUCING FIRST