9mm AR Input.........

they don't have any mags in stock though. gonna be a while is what they told me..

ramped bolt VS not ramped
1pjssh.jpg


different hammers, don't use the one on the right, AR15
1pjtb7.jpg


mod to make a lightning link work;)
9mm_a_34_small.jpg
 
For the price of the upper,all the other parts I need, and the ease of getting this thing up and running, for the extra $200.00 or so dollars, It looks like I may just buy the complete RRA 9mm Carbine..........;) :D

-9mm upper - $999.00
-Mag Block - $250.00
-9mm Hammer - $28.00
-9mm buffer - $39.00
-Magazine - $50.00

Total = $1357.00 + tax

Complete 9mm Carbine W/ one mag = $1629.00 + Tax

For the extra $272.00 dollars I get another complete lower................and have a complete rifle thats ready to run............;)


Decisions.......................:rolleyes:

SKBY.
 
Go big or go home. Might aswell get the complete gun as a stripped lower w/o parts kit is about 230 + parts kit, it seems like the $272 would of been worth it.

However, building your own gun IS fun. I'd go for the complete because then you have a 9MM and a .223 that you can use separately. Also for indoor handgun ranges you have a nice 'pistol' to use.

Its only money...
 
scotty said:
Go big or go home. Might aswell get the complete gun as a stripped lower w/o parts kit is about 230 + parts kit, it seems like the $272 would of been worth it.

However, building your own gun IS fun. I'd go for the complete because then you have a 9MM and a .223 that you can use separately. Also for indoor handgun ranges you have a nice 'pistol' to use.

Its only money...
Click to expand...

Going the complete route will leave me with a spare, complete ready to run Bushmaster lower.....................I can see another upper project coming up........:rolleyes: :p

SKBY.
 
P0WERWAGON said:
this is what you need to do to a bolt crrier to make it work with standrad AR15 triggers
fbb7fbdb.jpg


stole all the pics from AR15.com
Click to expand...

Do you know the angle they put on that?
 
I took my 10.5" RRA 9MM LAR-15 pistol out to the range tonight. This is a very fun gun. Was blasting steel targets from 25 - 40 yards and it was quite accurate. Any misses were completely my fault.

I wasn't sure how I'd like it, but I think it's gonna stay...

I vote for the complete gun. Multiple AR15s is a good thing. :)
 
Skullboy said:
Going the complete route will leave me with a spare, complete ready to run Bushmaster lower.....................I can see another upper project coming up........:rolleyes: :p

SKBY.
Click to expand...

I will generously give you $272 for your spare complete lower.:)

Looks like you might as well go for the complete gun. If you change the config at all than just sell your spare parts, or save them for that next build. This is biggest problem with spare parts, they end up costing me a ton of money when they transform into complete rifles, and then I'm out of spare parts.

On a side note, just picked up a Colt 2 piece mag block, anyone know of a smith that has experience installing these?
 
Skullboy,
I have a RRA 10.5" and it has run flawlessly, If you are ever interested in trying it out, I usually make it out to abby or mission once a week.
Wrench and I dumped a bunch of mags through it last night and I think I may be going out to abby tonight.
ar004.jpg
 
McNasty said:
Do you know the angle they put on that?
Click to expand...

Angle of ramp is 5deg . Depth of ramp is about .125"

If you try to do it yourself be warned the RRA carrier / bolt is very hard . You really should use carbide end mill
 
Zeddy said:
Skullboy,
I have a RRA 10.5" and it has run flawlessly, If you are ever interested in trying it out, I usually make it out to abby or mission once a week.
Wrench and I dumped a bunch of mags through it last night and I think I may be going out to abby tonight.
ar004.jpg
Click to expand...

Thx for the offer Dude.:D

I may be at Mission Thursday or Friday morning.

SKBY.
 
Thanks for the info. I've got carbide, I don't think I'd waste a HSS on it. :D


TRG-42 said:
Angle of ramp is 5deg . Depth of ramp is about .125"

If you try to do it yourself be warned the RRA carrier / bolt is very hard . You really should use carbide end mill
Click to expand...
 
I just placed my order for a RRA 10.5" A4 Pistol and some mags.:D:dancingbanana:

As soon as that puppy gets here that buffer tube is history and a collapsing stock will be installed!!!!!;)

SKBY.
 
Skullboy said:
As soon as that puppy gets here that buffer tube is history and a collapsing stock will be installed!!!!!;)

SKBY.
Click to expand...

Is it legal to speak of such things on the board?

BTW, Excellent choice, mine is a blast! :)

Where did you find mags?
 
XRC said:
Is it legal to speak of such things on the board?

BTW, Excellent choice, mine is a blast! :)

Where did you find mags?
Click to expand...

Questar has a few of the RRA 10 round pistol mags that they held on to to sell with pistol purchases.I got one of those, plus ordered another 5/25 Uzi Mag.

I plan to get a few on the new stainless 10 round versions that are coming in.

SKBY.
 
You must log in or register to reply here.
Back
Top Bottom