9mm loads

[WestIslandRifle]

been reloading for a while and i've decided to chage my load right now im useing VV n350 with hornady 125gr hollow point .356 for my 9mm and i've decided to load 147 gr rn im curious what is your guys recipes you use , powder ,crimp and oal ? thanks

 

[The Breeze]

Are you running a compensated gun? If not, I'd recommend going to a faster powder such as N310 or N320.

 

[WestIslandRifle]

im shooting a run of the mile xd 9mm with a powder river precision trigger and stainless guide rod

 

[Riggs]

4.2 gr Titegroup with .355 rn 124gr. 9mm. Glock 34. Nothing but love

 

[thump_rrr]

3.2gr of Titegroup with a 147gr plated bullet will give you 1100 FPS.
I'll tell you one thing Titegroup with lead bullets will make a hell of a lot of smoke.
I used to use Vihtavuori N320 for .45 ACP but it cost over double the price of Win231 or Titegroup.

 

[Auggie Doggie]

4.7gr of HS-6 with a 147gr lead RNFP.

Auggie D.

 

[Hotwheels81]

About 4.5-5.5MAX alliant power pistol
Range brass
CCI small pistol primers
147gr projectile
OAL to suit chamber/mag

PP likes pressure to burn clean so don't be scared to push it a bit and give it a firm crimp... I like PP for its versatility in cartridges from 9mm to .45 and it can push a 155gr 10mm XTP really REALLY fast

Starting to play with some bullseye 125gr cast loads for economy plinking but PP is still my go-to powder.

 

[WestIslandRifle]

3.2gr of Titegroup with a 147gr plated bullet will give you 1100 FPS.
I'll tell you one thing Titegroup with lead bullets will make a hell of a lot of smoke.
I used to use Vihtavuori N320 for .45 ACP but it cost over double the price of Win231 or Titegroup.

are you using berrys, hornady campro bullets ? and what do you put your OAL ?

 

[Wolf@TS]

147gr Berrys, 3.5gr Bullseye, 1.145 OAL
Runs my M&P flawlessly.

 

[WestIslandRifle]

147gr Berrys, 3.5gr Bullseye, 1.145 OAL
Runs my M&P flawlessly.

have you chronoed the load yet im curious as to what the fps is at muzzle ?