9mm

1

1887

Member
Rating - 100%
6   0   0
Hi I'm away working in camp with bad internet and bad cell. looking for some info on 9mm I have some 700X and titewad powder, federal small pistol primers and some CCI primers have to projectiles yet is there any good loads for any of this just try to use up some of the stuff I have thanks for the help
 
Paatz said:
What size bullets?
Generally, 4 grains of "titewad" will get you going.

heheh, titewad...heheh
Click to expand...

have not got them yet was looking for loads that would work with what I have from loading 12g shells keep seeing 700X and Titewad both I have. whats the hehehehe about lol
 
I must apologize.
I thought you meant "Titegroup", which is a pistol powder.
Since I don't do shotguns I had no idea there was actually a powder called Titewad.
So, the joke is on me! :redface:

Please feel free to disregard any advice I offer! :HR:
 
Paatz said:
I must apologize.
I thought you meant "Titegroup", which is a pistol powder.
Since I don't do shotguns I had no idea there was actually a powder called Titewad.
So, the joke is on me! :redface:

Please feel free to disregard any advice I offer! :HR:
Click to expand...

LOL I new there was a powder with a tite in it just was not sure so witch one it was for pistols. 700X I have seen and I guess it was titegroub not titewad.
 
there is both Titegroup and Titewad but im guessing you mean Titewad since you said you load 12ga with it.

you do not want to start with 4gr of titewad because the max load for 124gr 9mm is 3.4gr of titewad (2.9gr being the minimum)
the load would also depend on the type of bullet and weight. once you have decided which projectile you want to use then i would suggest going to www.hodgdonreloading.com to get the load data.
 
^^^ see above link for info ^^^

For any load data you need:

The bullet weight / type (lead, plated, jacketed)
The actual powder (no guesses here)
 
I have had excellent accuracy results with 700X. I stopped using it because it is a flake powder and other powders meter so much better.

I now use TiteGroup for accuracy loads. 3.5 under any bullet works well.
 
thechineseguy said:
there is both Titegroup and Titewad but im guessing you mean Titewad since you said you load 12ga with it.

you do not want to start with 4gr of titewad because the max load for 124gr 9mm is 3.4gr of titewad (2.9gr being the minimum)
the load would also depend on the type of bullet and weight. once you have decided which projectile you want to use then i would suggest going to www.hodgdonreloading.com to get the load data.
Click to expand...

Ya had a look but all the loads are cci primers wanting to use fed small pistil because I have 5000??
 
You must log in or register to reply here.
Back
Top Bottom